Abstract
The reconstruction of the three-dimensional (3D) morphology of polymeric microsphere layers based on confocal Raman microscopy was studied. Refraction of the Raman laser beam at the curved surface of the spheres broadens the focus volume inside the sphere. Compared to planar layers, the focus gets trapped inside the spheres such that the measured depth profiles are shifted and broadened. Additionally, the Raman signal of the underlying substrate is already observed for nominal focus positions above the microsphere layer. The results are successfully modeled with ray-optical simulations that allow for a clear understanding of the relevant mechanisms that lead to the generation of the Raman signals in the complex three-dimensional structures.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
