Abstract
The photoelectric response characteristics of an infrared spectrometer based on an acousto-optic tunable filter (AOTF) are greatly affected by the temperature change of the radio frequency power amplifier and shortwave infrared detector. If calibration is not conducted, that will affect the quantitative level of the data. This paper puts forward a measurement and correction method for the temperature characteristics of an AOTF infrared spectrometer which is used in lunar surface detection and sets up a temperature characteristics correction model. This model was applied to an AOTF infrared spectrometer mounted on China’s unmanned lunar rover. Laboratory tests show that the temperature causes an instrument variation of ∼20% when the temperature is between −20 ℃ and + 55 ℃, but this model reduces this variation to < 6%. Evaluating data from the lunar surface also verifies the effectiveness of this method.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
