Quantum cascade laser spectroscopy was used to quantify active pharmaceutical ingredient content in a model formulation. The analyses were conducted in non-contact mode by mid-infrared diffuse reflectance. Measurements were carried out at a distance of 15 cm, covering the spectral range 1000–1600 cm−1. Calibrations were generated by applying multivariate analysis using partial least squares models. Among the figures of merit of the proposed methodology are the high analytical sensitivity equivalent to 0.05% active pharmaceutical ingredient in the formulation, high repeatability (2.7%), high reproducibility (5.4%), and low limit of detection (1%). The relatively high power of the quantum-cascade-laser-based spectroscopic system resulted in the design of detection and quantification methodologies for pharmaceutical applications with high accuracy and precision that are comparable to those of methodologies based on near-infrared spectroscopy, attenuated total reflection mid-infrared Fourier transform infrared spectroscopy, and Raman spectroscopy.
DruyM.A.“Applications for Mid-IR Spectroscopy in the Pharmaceutical Process Environment”. Spectroscopy2004; 19(2): 60–63.
2.
FévotteG.“In Situ Raman Spectroscopy for In-Line Control of Pharmaceutical Crystallization and Solids Elaboration Processes: A Review”. Chem. Eng. Res. Des2007; 85(7): 906–920.
Pacheco-LondoñoL.C.Castro-SuarezJ.R.Aparicio-BolañosJ.Hernandez-RiveraS.P.“Angular Dependence of Source-Target-Detector in Active Mode Standoff Infrared Detection”. Proc. SPIE Int. Soc. Opt. Eng2013; 8711: 8711081–8711086.
5.
SuterJ.BernackiB.PhillipsM.“Spectral and Angular Dependence of Mid-Infrared Diffuse Scattering from Explosives Residues for Standoff Detection Using External Cavity Quantum Cascade Lasers”. Appl. Phys. B2012; 108(4): 965–974.
6.
Castro-SuarezJ.R.Pacheco-LondoñoL.C.Vélez-ReyesM.DiemM.TagueT.J.Hernandez-RiveraS.P.“FT-IR Standoff Detection of Thermally Excited Emissions of Trinitrotoluene (TNT) Deposited on Aluminum Substrates”. Appl. Spectrosc2013; 67(2): 181–186.
7.
Galán-FreyleN.J.Pacheco-LondoñoL.C.Figueroa-NavedoA.M.Hernandez-RiveraS.P.“Standoff Detection of Highly Energetic Materials Using Laser-Induced Thermal Excitation of Infrared Emission”. Appl. Spectrosc2015; 69(5): 535–544.
HvozdaraL.PenningtonN.KraftM.KarlowatzM.MizaikoffB.“Quantum Cascade Lasers for Mid-Infrared Spectroscopy”. Vib. Spectrosc2002; 30(1): 53–58.
10.
CastilloP.C.SydorykI.GrossB.MosharyF.“Ambient Detection of CH4 and N2O by Quantum Cascade Laser”. Proc. SPIE Int. Soc. Opt. Eng2013; 8718: 87180J.
11.
C.K.N. Patel. “Quantum Cascade Lasers and Applications in Defense and Security”. In: 2011 IEEE Photonics Society Summer Topical Meeting Series. Montreal, QC: July 18–20, 2011. Pp. 49–50.
12.
C.K.N. Patel. “Mid Wave Infrared and Long Wave Infrared QCLs and their Applications to Sensors”. In: K. Ewing and M. Ferreira, editors. Advanced Photonics 2013, OSA Technical Digest. Washington DC: Optical Society of America, 2013. Paper SW2B.2.
13.
NormandE.HowiesonI.McCullochM.BlackP.“Quantum Cascade Laser (QCL) based sensor for the detection of explosive compounds”. Proc. SPIE Int. Soc. Opt. Eng2006; 6402: 64020G.
14.
PatelC.K.N.“Laser Based In-Situ and Standoff Detection of Chemical Warfare Agents and Explosives”. Proc. SPIE Int. Soc. Opt. Eng2009; 7484: 748402-1–748402-14.
15.
PatelC.K.N.LyakhA.“High Power Quantum Cascade Lasers for Infrared Countermeasures, Targeting and Illumination, Beacons and Standoff Detection of Explosives and CWAs”. Proc. SPIE Int. Soc. Opt. Eng2015; 9467: 946702.
16.
Castro-SuarezJ.R.Hidalgo-SantiagoM.Hernández-RiveraS.P.“Detection of Highly Energetic Materials on Non-Reflective Substrates Using Quantum Cascade Laser Spectroscopy”. Appl. Spectrosc2015; 69(9): 1023–1035.
17.
ZhangL.TianG.LiJ.YuB.“Applications of Absorption Spectroscopy Using Quantum Cascade Lasers”. Appl. Spectrosc2014; 68(10): 1095–1107.
18.
Van NesteC.W.SenesacL.R.ThundatT.“Standoff Spectroscopy of Surface Adsorbed Chemicals”. Anal. Chem2009; 81(5): 1952–1956.
19.
CharltonC.KatzirA.MizaikoffB.“Infrared Evanescent Field Sensing with Quantum Cascade Lasers and Planar Silver Halide Waveguides”. Anal. Chem2005; 77(14): 4398–4403.
20.
CiaffoniL.HancockG.HarrisonJ.J.van HeldenJ.-P.H.LangleyC.E.PeverallR.RitchieG.A.D.WoodS.“Demonstration of a Mid-Infrared Cavity Enhanced Absorption Spectrometer for Breath Acetone Detection”. Anal. Chem2012; 85(2): 846–850.
KoleM.R.ReddyR.K.SchulmerichM.V.GelberM.K.BhargavaR.“Discrete Frequency Infrared Microspectroscopy and Imaging with a Tunable Quantum Cascade Laser”. Anal. Chem2012; 84(23): 10366–10372.
MertiriA.AltugH.HongM.K.MehtaP.MertzJ.ZieglerL.D.ErramilliS.“Nonlinear Midinfrared Photothermal Spectroscopy Using Zharov Splitting and Quantum Cascade Lasers”. ACS Photonics2014; 1(8): 696–702.
25.
PleitezM.A.LiebleinT.BauerA.HertzbergO.von Lilienfeld-ToalH.MänteleW.“In Vivo Noninvasive Monitoring of Glucose Concentration in Human Epidermis by Mid-Infrared Pulsed Photoacoustic Spectroscopy”. Anal. Chem2012; 85(2): 1013–1020.
26.
RütherA.PfeiferM.Lórenz-FonfríaV.A.LüdekeS.“pH Titration Monitored by Quantum Cascade Laser-Based Vibrational Circular Dichroism”. J. Phys. Chem. B2014; 118(14): 3941–3949.
YehK.KenkelS.LiuJ.-N.BhargavaR.“Fast Infrared Chemical Imaging with a Quantum Cascade Laser”. Anal. Chem2014; 87(1): 485–493.
29.
GrillsD.C.CookA.R.FujitaE.GeorgeM.W.PresesJ.M.WishartJ.F.“Application of External-Cavity Quantum Cascade Infrared Lasers to Nanosecond Time-Resolved Infrared Spectroscopy of Condensed-Phase Samples Following Pulse Radiolysis”. Appl. Spectrosc2010; 64(6): 563–570.
30.
HolthoffE.L.MarcusL.S.PellegrinoP.M.“Quantum Cascade Laser Based Photoacoustic Spectroscopy for Depth Profiling Investigations of Condensed-Phase Materials”. Appl. Spectrosc2012; 66(9): 987–992.
31.
SchadenS.Domínguez-VidalA.LendlB.“On-Line Reaction Monitoring in the Liquid Phase Using Two Mid-Infrared Quantum Cascade Lasers Simultaneously”. Appl. Spectrosc2006; 60(5): 568–571.
32.
RoggoY.ChalusP.MaurerL.Lema-MartinezC.EdmondA.JentN.“A Review of Near Infrared Spectroscopy and Chemometrics in Pharmaceutical Technologies”. J. Pharm. Biomed. Anal2007; 44(3): 683–700.
33.
WangX.FuQ.ShengJ.YangX.JiaJ.DuW.“Construction of a Universal Quantitative Model for Ibuprofen Sustained-Release Capsules from Different Manufacturers using Near-Infrared Diffuse Reflection Spectroscopy”. Vib. Spectrosc2010; 53(2): 214–217.
34.
PestanerJ.P.mullickF.G.CentenoJ.A.“Characterization of Acetaminophen: Molecular Microanalysis with Raman Microprobe Spectroscopy”. J. Forensic. Sci1996; 41(6): 1060–1063.
35.
KachrimanisK.BraunD.E.GriesserU.J.“Quantitative Analysis of Paracetamol Polymorphs in Powder Mixtures by FT-Raman Spectroscopy and PLS Regression”. J. Pharm. Biomed. Anal2007; 43(2): 407–412.
36.
ChanK.L.A.HammondS.V.KazarianS.G.“Applications of Attenuated Total Reflection Infrared Spectroscopic Imaging to Pharmaceutical Formulations”. Anal. Chem2003; 75(9): 2140–2146.
37.
MehtaN.K.Goenaga-PoloJ.Hernandez-RiveraS.P.HernandezD.ThomsonM.A.MellingP.J.“Development of an In Situ Spectroscopic Method for Cleaning Validation using Mid-IR Fiber-Optics”. BioPharm2002; 15(5): 36–42.
38.
HensonM.J.ZhangL.“Drug Characterization in Low Dosage Pharmaceutical Tablets Using Raman Microscopic Mapping”. Appl. Spectrosc2006; 60(11): 1247–1255.
39.
ThakralN.K.RagoonananV.SuryanarayananR.“Quantification, Mechanism, and Mitigation of Active Ingredient Phase Transformation in Tablets”. Mol. Pharmaceutics2013; 10(8): 3128–3136.
AlsirawanM.B.MohammadM.A.AlkasmiB.AlharethK.El-HammadiM.“Development and Validation of a Simple HPLC Method for the Determination of Ibuprofen Sticking onto Punch Faces”. J. Pharm. Pharm. Sci2013; 5(4): 227–231.
42.
KubelkaP.“New Contributions to the Optics of Intensely Light-Scattering Materials: Part I”. J. Opt. Soc. Am1948; 38(5): 448–448.
43.
BullC.R.“Compensation for Particle Size Effects in Near Infrared Reflectance”. Analyst1991; 116(8): 781–786.
44.
BlancoM.BautistaM.AlcaláM.“Preparing Calibration Sets for use in Pharmaceutical Analysis by NIR Spectroscopy”. J. Pharm. Sci2008; 97(3): 1236–1245.
45.
LorberA.“Error Propagation and Figures of Merit for Quantification by Solving Matrix Equations”. Anal. Chem1986; 58(6): 1167–1172.
46.
FerreiraM.H.BragaJ.W.B.SenaM.M.“Development and Validation of a Chemometric Method for Direct Determination of Hydrochlorothiazide in Pharmaceutical Samples by Diffuse Reflectance Near Infrared Spectroscopy”. Microchem. J2013; 109: 158–164.
47.
OlivieriA.C.FaberN.M.FerréJ.BoquéR.KalivasJ.H.MarkH.“Uncertainty Estimation and Figures of Merit for Multivariate Calibration (IUPAC Technical Report)”. Pure. Appl. Chem2006; 78(3): 633.
48.
BerntssonO.DanielssonL.G.FolestadS.“Estimation of Effective Sample Size when Analysing Powders with Diffuse Reflectance Near-Infrared Spectrometry”. Anal. Chim. Acta1998; 364(1–3): 243–251.
49.
WikströmH.LewisI.R.TaylorL.S.“Comparison of Sampling Techniques for In-Line Monitoring Using Raman Spectroscopy”. Appl. Spectrosc2005; 59(7): 934–941.
50.
KimM.ChungH.WooY.KemperM.“New Reliable Raman Collection System using the Wide Area Illumination (WAI) Scheme Combined with the Synchronous Intensity Correction Standard for the Analysis of Pharmaceutical Tablets”. Anal. Chim. Acta2006; 579(2): 209–216.
51.
IgneB.HurburghC.R.“Local Chemometrics for Samples and Variables: Optimizing Calibration and Standardization Processes”. J. Chemom2010; 24(2): 75–86.
52.
AllegriniF.OlivieriA.C.“Analytical Figures of Merit for Partial Least-Squares Coupled to Residual Multilinearization”. Anal. Chem2012; 84(24): 10823–10830.
53.
OstraM.UbideC.VidalM.ZuriarrainJ.“Detection Limit Estimator for Multivariate Calibration by an Extension of the IUPAC Recommendations for Univariate Methods”. Analyst2008; 133(4): 532–539.
