Time Response of Shape Memory Alloy Actuators

Abstract

Force/displacement actuators with the high output power and time response can be fabricated from shape memory wires or ribbons. Typically Ni-Ti shape memory alloys are used as an active material in such actuators. They are driven by Joule heating and air convection cooling. In the present work, the time response of various types of Ni-Ti actuators having different transformation temperatures and geometrical sizes, is studied systematically under conditions of free and forced air convection.

The simple analytical model for calculating the time response is developed which accounts for the latent heat and thermal hysteresis of transformation. For all the types of considered actuators, the calculated time response is in a good agreement with that observed experimentally. Finally, on the base of the suggested model, we present the time response of Ni-Ti actuators calculated as a function of their transformation temperature and cross section dimensions.

Get full access to this article

View all access options for this article.

References

Baehr, H. D. and Stephan, K. , 1996. “Wärme—und Stoffübertragung,” Springer-Verlag, Berlin.

Beitz, W. and Küttner K. H. 1995. “Dubbel Tashenbuch für den maschinenbau,” Springer-Verlag, Berlin.

Bekker, A. and Brinson L. C. , 1997. “Temperature-induced phase transformation in a shape memory alloy: phase diagram based kinetics approach,” J. Mech. Solids, 45, pp. 949-988.

Bekker, A. , Brinson L. C. and Issen K. , 1998. “Localized and diffuse thermoinduced phase transformation in 1-D shape memory alloys,” J. of Intell. Mat. Syst. & Struct., 9, pp. 355-365.

Bo, Z. , Lagoudas, D. C. and Miller, D. , 1999. “Material characterization of SMA actuators under nonproportional thermomechanical loading,” J. of Eng. Mat. & Tech., 121, pp. 75-85.

Boud, J. G. and Lagoudas, D. C. , 1996. “A thermodynamic constitutive model for the shape memory materials. Part I: The monolithic shape memory alloys,” Int. J. of Plasticity, 12, pp. 805-842.

Brailovski, V. , Trochu, F. and Daigneault, G. , 1996. “Temporal characteristics of shape memory linear actuators and application to circuit breakers,” Mat. & Design, 17, pp. 151-158.

Brinson, L. C. , 1993. “One dimensional constitutive behavior of shape memory alloys,” J. of Intell. Mat. Syst. & Struct., 4(2), pp. 229-249.

Brinson, L. C. , Bekker, A. and Hwang, S. , 1996. “Deformation of shape memory alloys due to thermo-induced transformation,” J. of Intell. Mat. Syst. & Struct., 7, pp. 97-107.

10.

Lagoudas, D. C. and Bo, Z. , 1999. “Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part II: Material characterization and experimental results for a specific transformation cycle,” Int. J. of Eng. Sci., 37, pp. 1141-1174.

11.

Leo, P. H. , Shield, T. W. and Bruno, O. P. , 1993. “Transient heat transfer effects on the pseudoelastic behavior of shape-memory wires,” Acta Metall. Mater., 41, pp. 2477-2485.

12.

Liang, C. and Roger, C. A. , 1990. “One-dimensional thermomechanical constitutive relations for shape memory materials,” J. of Intell. Mat. Syst. & Struct., 1(2), pp. 207-234.

13.

Liang, C. and Roger, C. A. 1997. “Design of shape memory alloys,” J. of Intell. Mat. Syst. & Struct., 8, pp. 303-313.

14.

Likhachev, V. A. , 1994. “Theory of functional and mechanical properties of materials undergoing reversible martensitic tranformations,” Physics of Metals & Metallography, 77, pp. 120-133.

15.

Miyazaki, S. 1999. “Ni-Ti SMA thin films and their applications,” 1st European Conf. on Shape Memory and Superelastic Technologies, Antwerp, Belgium, in press.

16.

Polidori, G. , Lachi, M. and Pader, J. , 1998. “Unsteady convective heat transfer on a semi-infinite flat surface impulsively heated,” Int. Comm. Heat Mass Transfer, 25, pp. 33-42.

17.

Seelecke, S. and Müller, I. , 1998. “Thermodynamic aspects of shape memory alloys” in Shape memory alloys—from microstructure to macroscopic properties, Airoldi, G. (ed.), Trans. Tech. Publ., Zürich.

18.

Shaw, J. A. and Kuriakides, S. , 1995. “Thermomechanical aspects of NiTi,” J. Mech. Phys. Solids, 43, pp. 1243-1281.

19.

Shelyakov, A. V. , Antonov, V. A. , Bukovsky, Yu. A. and Matveeva, N. M. , 1994. “Optical devices based on shape memory effect for signal processing,” Proc. 1st Int. Conf. on Shape Memory and Superelastic Technologies, Pacific Grove, California, USA, pp. 335-340.

20.

Tanaka, Y. and Nagaki, S. , 1982. “A thermomechanical description of materials with internal variables in the process of phase transitions,” Ingenier Archiv., 51, pp. 287-299.

21.

Wirtz, R. A. , Gordaninejad, F. and Wu, W. , 1995. “Free response of a thermally driven, composite actuator,” J. Intell. Mat. Systems and Structures, 5, pp. 364-371.

22.

Yaeger, J. R. , 1990. “Electrical actuators: alloy selection, processing and evaluation” in “Engineering Aspects of Shape Memory Alloys,” ed. T. W. Duerig et al. , Butterworth-Heinemann, London, pp. 219-233.