A digital readout electronics scheme in CMOS technology is described for integration with micro-electro-mechanical (MEM) sensors on the same chip. The readout circuit is general in nature and can be employed with a variety of analog sensors. The presented scheme in CMOS technology is fully integrable with the multiple sensor outputs either in a chain or an array format and is capable of detecting low analog output signals from a few mV to mV range. The CMOS circuit design is compatible with ±1.5V operation for low power consumption.
Get full access to this article
View all access options for this article.
References
1.
Chen, J. and K. D. Wise, 1997, “A High Resolution Silicon Monolithic Nozzle Array for Inkjet Printing,”IEEE Trans. Electron Devices, 44:1401-1409.
2.
Geiger, R. L., P. E. Allen and N. R. Strader, 1990, “VLSI Design Techniques for Analog and Digital Circuits,”McGraw-Hill.
3.
George, N., 1996, “Microelectronic Test Structures for Gas Sensor Implementation using Bulk-Micromachining in CMOS Process,” M.S. thesis, Louisiana State University, Baton Rouge, LA.
4.
Howe, R. T. and C. G. Sodini, 1997, “Microelectronics—An Integrated Approach, Prentice Hall.
5.
Kim, K. Y., N. Kusayanagi and A. A. Abidi, 1997, “A 10-bit, 100-MS/s CMOS A/D Converter,”IEEE J. Solid-State Circuits, 32:302-333.
6.
Malcovodi, P. C., Azeredo, P. O. Leary, F. Maloberti and H. Bates, 1994, “Smart Sensor Interface with A/D Conversion and Programmable Calibration,”IEEE J. Solid-State Circuits, 29: 963-966.
7.
Milgrome, O. B., S. A. Kleinfelder and M. E. Levi, 1992, “A 12-Bit Analog-to-Digital Converter for VLSI Applications in Nuclear Science,”IEEE Trans. Nuclear Science, 39: 771-775.
8.
Milgrome, O. B. and S. A. Kleinfelder, 1993, “A Monolithic CMOS 16 Channel, 12-Bit, 10 Microsecond Analog-to-Digital Converter Integrated Circuit,”IEEE Trans. Nuclear Science, 40:721-723.
9.
Peterson, K. E., 1992, “Silicon as a Mechanical Material,”Proc. IEEE, 70:420-457.
10.
Ristic, L. (Editor), 1994, “Sensor Technology and Devices,”Artech House.
11.
Srivastava, A., G. M. Reddy and J. Cherukuri, 1994, “Readout Interface Circuits for MOS C-V Sensors,”IEEE Proc. 37th Midwest Symp. Circuits and Systems, 180-190.
12.
Srivastava, A., N. George and J. Cherukuri, 1995, “Micromachined Hydro-carbon-Based Gas Sensors,” in Proc. of Conference on Micromachined Devices and Components in SPIE’s 1995 Symposium on Micromachining and Microfabrication, 2642:121-129.
13.
Stadler, S., 1997, “Integration of a Post-Fabricated Accelerometer on a Chip with Standard CMOS Circuitry Using Deep X-ray Lithography, M.S. thesis, Louisiana State University, Baton Rouge, LA.
14.
Stadler, S. and P. K. Ajmera, 1997, “Integration of LIGA Structures with CMOS Circuitry,”Proc. 4th Annual SPIE Symp. on Smart Structures and Materials, 3046:230-241.
15.
Venes, A. G. W. and R. J. Van de Plassche, 1996, “An 80 MHz, 8-bit CMOS Folding A/D Converter with Distributed Track-and-Hold Preprocessing,”IEEE J. Solid-State Circuits, 31:1846-1853.
16.
Wise, K. W., 1986, “Integrated Sensors-Key to Future VLSI Systems,”IEEE Proc. 6th Sensor Symp., 1-9.
17.
Weste, N. H. E. and K. Eshraghian, 1993, “Principles of CMOS VLSI Design - A System Perspective,”Addison-Wesley.
18.
Yeh, C. and K. Najafi, 1997, “A Low-Voltage Tunneling-Based Silicon Microacceleromter,”IEEE Trans. Electron Devices, 44:1875-1882.
