Flexible Fixture Device with Magneto-Rheological Fluids

Abstract

In manufacturing, fixtures are required to locate parts in a correct position to ensure machining accuracy. Especially for machining on irregular-shaped work-pieces and fine parts, flexible fixtures are in demand to reduce non-machining time. The quick phase change and strong yield strength of MR fluids lead us to investigate the possibility to produce MR-fluid-flexible-fixture. The yield strength and pre-yield elastic modulus are the key issues for a flexible fixture. However, a typical MR fluid currently has yield stress about 100 kPa that is not sufficient for flexible fixtures. To overcome the difficulties, we apply pressure to force single chains into thick columns. This produces a structure-enhanced yield stress. MR fluids in this process produce a yield stress of 800 kPa or above under a moderate magnetic field. The three-dimensional load capacity of MR fluids in this process is strong enough to ensure precision manufacturing. In addition, MR-fluid-flexible-fixtures are environmentally friendly and work at room temperature.

Get full access to this article

View all access options for this article.

References

1. Trappey A. J. C. and Liu C. R. , A literature survey of fixture-design automation, International Journal of Advanced Manufacturing Technology, 5(3) (1991) pp. 240-255.

2. Nee A.Y. C. and Kumar A. S. , A framework for an object/rule-based automated fixture design system, Annals CIRP (1991) pp. 147-151.

3. Thompson B. S. and Gandhi M. V. , Commentary on flexible fixture, Applied Mechanics Review, 39(9) (1989) pp. 1365-1369.

4. Hazen F. B. and Wright P. K. , Workholding automation: innovations in analysis, design and planing, Manufacturing Review, 43(4) (1990) pp. 224-237.

5. Abou-Hanna J. , Okamura K. and McGreevy T. , Dynamic behavior and creep characteristics of flexible particulate bed fixtures, Journal of Manufacturing System, 12(6) (1993) pp. 496-505.

6. For example, see, Electrorheological Fluids, Magneto-Rheological Suspension and TheirApplications, ed. by M. Nakano and K. Koyama (World Scientific Publishing, Singapore, 1998); Electrorheological Fluids, Magneto-Rheological Suspension and Associated Technology, ed. by W. A. Bullough, (World Scientific Publishing, Singapore, 1996); Electrorheological Fluids, ed. by R. Tao and G. D. Roy, (World Scientific Publishing, Singapore, 1994).

7. Endo S. , Ishino, Y. and Saito, T. , Electrorheological fluid-applied apparatus, electrorheological fluid-applied vibration controller, and electrorheological fluid-applied fixing apparatus, U.S. Patent 5267633 (1993).

8. Ginder J. M. and Spronston J. L. , The performance of field-controllable fluids and devices, Proc. of the 5th International Conference on New Actuators, ed. By H. Borgmanm (Axon Technologie Consult, Bremen, Germany, 1996) pp. 313-319.

9. Phule P. P. and Ginder J. M. , Synthesis and properties of novel magnetorheological fluids having improved stability and redispersibility, Electrorheological Fluids, Magneto-Rheological Suspension and TheirApplications, ed. by M. Nakano and K. Koyama (World Scientific Publishing, Singapore, 1998) pp. 445-453.

10.

10. Tang X. , Zhang X. and Tao R. , Structure enhanced static yield stress of MR fluids, Journal of Applied Physics, 87(5), (2000) pp. 2634-2638.

11.

11. Weiss K. D. , Carlson, J. D. and Coulter J.P. , Application of Electrorheological fluids, Advances in Electrorheological Fluids, ed. by M.A. Kohudic (Technomic Publishing Co., Inc., Lancaster, PA, 1994)pp. 64-70.