Sage Journals: Discover world-class research

Abstract

Application of composites in the aircraft industries is becoming common use. The production techniques often applied are wet hand lay-up for smaller aircraft and high cost techniques for application of composites in civil and military aircraft. Within the family of Resin Transfer Moulding theVacuum Injection production method has been developed as a promising low-cost high quality production technique. Vacuum Injection has been developed for application of large maritime structures and other non-aerospace applications. In this study the application of Vacuum Injection in the aviation industry, focussing on general aviation industry, is investigated. Part of the studywas the production of a full-scale vertical rudder. This rudder has been produced and the Vacuum Injection technique is found to be very suitable for application in general aviation industry.

Keywords

vacuum injection resin transfer moulding general aviation composite airframe

Get full access to this article

View all access options for this article.

References

1. Van Tooren, M. J. L. Sandwich fuselage design. Delft University of Technology, Delft 1998.;

2. Beukers, A. Lightness. 010 publishers, Rotterdam 1998.

3. Cochran, R. Advanced Composite Processes for Aerospace Applications. 42nd International SAMPE Symposium May 4–8, 1997, pp. 635–640.

4. Avva, V. S. Comparative Studies on laminated and textile composites. AIAA paper 97-1322, 1997.

5. Lazarus, P. Resin infusion of marine composites. 41st International SAMPE Symposium March 24–28, 1996, pp. 1447–1458.

6. Van Herpt, E. Ontwikkeling van een geslotenmal productietechniek voor de jachtbouw. Centre of Lightweight Constructions TUD-TNO, Delft, 1997.

7. Gabriele, M. C. Chrysler’s Viper Innovation. Plastics Technology, March 1994.

8. Van Tooren, M. J. L. Composites: Materials, structures and manufacturing processes. Delft University of Technology, Delft, 1993.

9. Beckwith, S. W. Resin Transfer Molding: A decade of technology advances. SAMPE journal, Vol. 34, No. 6, pp. 7–19, November/December 1998.

10.

10. Potter, K. Resin Transfer Moulding, London, 1997.

11.

11. Toonssen, P. J. PI-7 Manual for the simulation of RTM. TNO Institute of Industrial Technology, March 1997.

12.

12. Cai, Z. Simplified Mold Filling Simulation in Resin Transfer Molding. Journal of Composite Materials, Vol. 26, No. 17/1992, pp. 2606–2630.

13.

13. DeCillis, J. R. Affordable approaches to the production of complex aerospace composite components via resin transfer molding. 43rd International SAMPE Symposium May 31–June 4, 1998, pp. 1710–1714.

Vacuum Injection in Aviation Manufacturing Processes

Abstract

Keywords

Get full access to this article

References