Sage Journals: Discover world-class research

Abstract

A technique for determining the locations of piezoelectric sensors and actuators (S/As) of intelligent structures on the basis of element sensitivities of the singular-values of the controllability and observability is presented. The element sensitivity of the singular-values is used as the measure to identify the best locations of S/As, which is defined from the 1st order perturbations of singular-values of the controllability and observability. A criterion and a threshold value are used to determine which actuator/sensor elements need to be kept/removed based on the sensitivity information. Locations of S/As are determined as the point where the element sensitivity of the singular-values is the maximum. Two numerical examples, the cantilever beam and the model of solar panels, are given to illustrate the applications of the present method.

Get full access to this article

View all access options for this article.

References

Richard, G. C. and Brad, S. L. , “Sensor Placement and Structural Damage Identification from Minimal Sensor Information,” AIAA Journal, Vol. 35, No. 2, 1997, pp. 369-374.

Holnicki-Szulc, J. , Lopez-Almansa, F. and Rodellar, J. , “Optimal location of Actuators for Active Damping of Vibration,” AIAA Journal, Vol. 31, No. 7, 1993, pp. 1274-1279.

Gupta, N. K. and Hall, W. F. , “Design and Evaluation of Sensor Systems for State and Parameter Estimation,” Journal of Guidance and Control, Vol. 1, No. 67, 1978, pp. 397-403.

Chang, I. J. and Soong, T. T. , “Optimal Controller Placement in Modal Control of Complex Systems,” Journal of Mathematical Analysis Application, Vol. 75, 1980, pp. 340-358.

Kang, Y. K. , Park, H. C. , Hwang, H. and Han, K. S. , “Optimum Placement of Piezoelectric Sensor/Actuator for Vibration Control of Laminated Beams,” AIAA Journal, Vol. 34, No. 9. 1996, pp. 1921-1926.

Haftka, R. T. , “Optimum Placement of Control for Static Deformations of Space Structures,” AIAA Journal, Vol. 22, No. 9, 1984, pp. 1293-1298.

Burdisso, R. and Haftka, R. , “Optimal Location of Actuators for Correcting Distortions in Large Truss Structures,” AIAA Journal, Vol. 27, No. 10, 1989, pp. 1406-1411.

Lim, K. B. , “A Method for Optimal Actuator and Sensor Placement for Large Flexible Space Structures,” Proceedings of the AIAA Guidance, Navigation and Control Conference. AIAA, Washington, D.C., 1990, pp. 1352-1356.

Kammer, D. C. , “Sensor Placement for On Orbit Modal Identification and Correlation of Large Space Structures,” Journal of Guidance and Dynamics, Vol. 14, No. 9, 1991, pp. 251-259.

10.

Liu, C. and Tasker, F. A. , “Sensor Placement for Multi-Input Multi-Output Dynamic Identification,” Proceeding of the 36th Structures, Structural Dynamics, and Materials Conference, AIAA, Washington, D.C., 1995, pp. 3327-3337.

11.

Liu, Z. S. , Wang, D. J. , Hu, H. C. and Yu, M. , “Measure of Modal Observability and Controllability in Vibration Control of Flexible Structures,” Journal of Guidance, Control and Dynamics, Vol. 17, No. 6, 1994, pp. 1377-1380.

12.

Suhuan Chen , Matrix Perturbation Theory In Structural Vibration Analysis, Chongqing Publishing House, Chongqing, P.R. China, 1993 (in Chinese).

13.

Bathe, K. J. and Wilson E. L. , Numerical Methods in Finite Element Analysis, Prentice-Hall, Inc., 1976.

A New Method for Determining Locations of the Piezoelectric Sensor/Actuator for Vibration Control of Intelligent Structures

Abstract

Get full access to this article

References