A Finite Element Analysis of Second Order Effects on the Frequency Response of a SAW Device

Abstract

Electrode perturbation of the surface may cause significant second order effects on the frequency response of surface acoustic wave (SAW) devices for high frequency applications. These effects in a Y-Z lithium niobate filter are analyzed using a recently developed finite element model. In this model, the equations of wave propagation in piezoelectric materials are discretized using the Galerkin method, in which an implicit algorithm of the Newmark family with unconditional stability is implemented. The Rayleigh damping coefficients are included in the elements near the boundary to reduce the interference of reflected waves. The frequency response of the filter is obtained through the Fourier transform of the impulse response, which is solved directly from the finite element simulation. The analyses have shown that for aluminum electrodes of fixed thickness, the second order effects on the frequency response become increasingly significant as the device is scaled smaller to have higher central frequencies. Typically, for aluminum electrodes of thickness 2000 Å, the frequency response is significantly distorted for the device of the central frequency at above 2 GHz. Quantitative analyses of the second order effects in the device of various center frequencies provide insights for designing high performance SAW devices for high frequency applications.

Get full access to this article

View all access options for this article.

References

Auld, B. A. 1973. Acoustic Fields and Waves in Solids, John Wiley & Sons, New York.

Ballantine, D. S. , R. M. White , S. J. Martin , A. J. Ricco , E. T. Zellers , G. C. Frye and H. Wohltjen . 1997. Acoustic Wave Sensors: Theory, Design, and Physico-chemical Applications, Academic Press, New York.

Bathe, K. J. 1996. Finite Element Procedures, Prentice-Hall, Englewood Cliffs, NJ.

Campbell, C. K. 1998. Surface Acoustic Wave Devices for Mobile and Wireless Communications, Academic Press, New York.

Chen, Z. H. , M. Takeuchi , and K. Yamanouchi . 1992. “Analysis of the film thickness dependence of a single-phase unidirectional transducer using the coupling-of-modes theory and the finite element method,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 39: 82-94.

Farnell, G. W. 1977. “Elastic surface waves,” in Surface Wave Filters, ed. by H. Mattews , John Wiley & Sons, New York.

Hasegawa, K. and M. Koshiba . 1990. “Finite-element solution of Rayleigh-wave scattering from reflective gratings on a piezoelectric substrate,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 37: 99-105.

Hughes, T. J. R. 1987. The Finite Element Method Linear Static and Dynamic Finite Element Analysis, Prentice-Hall, Englewood Cliffs, NJ.

Ingebrigtsen, K. A. 1969. “Surface waves in piezoelectrics,” J. Appl. Phys., 40: 2681-2686.

10.

Jones, W. S. , C. S. Hartmann , and T. D. Sturdivant , 1972. “Second order effects in surface devices,” IEEE Transactions on Sonics and Ultrasonics, 3: 368-377.

11.

Lerch, R. 1990. “Simulation of piezoelectric devices by two- and three-dimensional finite elements,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 37: 233-247.

12.

Milsom, R. F. , N. H. C. Reilly and M. Redwood . 1977. “Analysis of generation and detection of surface and bulk acoustic waves by interdigital transducers,” IEEE Transactions on Sonics and Ultrasonics, 24: 147-166.

13.

Morgan, D. P. 1985. Surface-Wave Devices for Signal Processing, Elsevier, Amsterdam.

14.

Morgan, D. P. 1998. “History of SAW devices,” IEEE International Frequency Control Symposium, 439-460.

15.

Skeie, H. 1970. “Electrical and Mechanical loading of a piezoelectric surface supporting surface waves,” J. Acoust. Soc. Am., 48: 1098-1109.

16.

Sloan, S. W. 1987. “A fast algorithm for constructing Delaunay triangulations in the plane,” Adv. Eng. Software, 9: 34-54.

17.

Smith, I. M. and Griffiths, D. V. 1998. Programming the Finite Element Method, 3rd Ed., John Wiley & Sons, New York.

18.

Smith, W. R. , H. M. Gerard , J. H. Collins , T. M. Reeder and H. J. Shaw . 1969. “Analysis of interdigital surface wave transducers by use of an equivalent circuit model,” IEEE Transaction on Microwave Theory and Techniques, 17: 856-864.

19.

Tancrell, R. H. and M. G. Holland . 1971. “Acoustic surface wave filters,” Proc. IEEE, 59: 393-409.

20.

Tiersten, H. F. 1969. Linear Piezoelectric Plate Vibrations, Plenum Press, New York.

21.

Timoshenko, S. P. , D. H. Young and W. Weaver . 1974. Vibration Problems in Engineering, 4th ed. John Wiley, New York.

22.

Ventura, P. , J. M. Hode , M. Solal , J. Desbois and J. Ribbe . 1998. “Numerical methods for SAW propagation characterization,” IEEE Ultrasonic Symposium, 175-186.

23.

White, R. M. 1998. “Acoustic sensors for physical, chemical, and biochemical Applications,” IEEE International Frequency Control Symposium,587-594.

24.

Xu, G. 2000. “Direct finite element analysis of the frequency response of a Y-Z lithium niobate SAW filter,” Smart Materials and Structures, 9: 973-980.