Parameters Affecting the In-Line Measurement of Gas Solubility in Thermoplastic Melts during Foam Extrusion

Abstract

The knowledge of gas solubility at processing conditions is of paramount importance for the understanding and optimization of extrusion foaming by gas injection. A recently developed in-line optical method is used to generate data of the solubility of atmospheric gases in PS and PET in single or twin screw extruders with gas injection capabilities. Overall, the in-line data compare favorably with off-line data where Henry’s law constants were obtained from the slope of solubility/equilibrium gas pressure plots. Results obtained with the twin-screw extruder configured for improved mixing indicate a) better data consistency, presumably as a result of enhanced homogenization/dissolution and longer residence time and, b) a higher degree of sensitivity in detecting differences in the solubility of different gases.

Get full access to this article

View all access options for this article.

References

1. C. D. Han , Multiphase Flow in Polymer Processing, Chapter 6, pp. 257–338, Academic Press, New York (1981).

2. P. L. Durrill and R. G. Griskey , AIChE J., 15, 106-106(1969).

3. J. L. Lundberg , M. B. Wil and M. J. Huyett , I&EC Fundamentals, 2, 37-37(1963).

4. A. S. Micheals , W. R. Vieth and J. A. Barrie , J. Appl. Phys., 34, 1-1(1963).

5. P. L. Durrill and R. G. Griskey , AIChE J., 12, 1147-1147(1966).

6. S. S. Dagli , R. F. Staats-Westover and J. A. Biesenberger , Proc. Soc. Plast. Eng. Ann. Techn. Conf., 35, 889-889(1989).

7. D. H. Rein , J. Csernica , R. F. Baddour and R. E. Cohen , Macromolecules, 23, 4456-4456(1990).

8. D. Duda et al., Ind. Chem. Fund., 12,133-133(1973).

9. B. Wang and Y. P. Handa , Proc. Soc. Plast. Eng. Ann. Techn. Conf., 43, 1979-1979(1997).

10.

10. S. K. Dey , Q. Zhang , N. Faridi and M. Xanthos , Proc. Soc. Plast. Eng. Ann. Techn. Conf., 43, 1988-1988(1997).

11.

11. Q. Zhang , M. Xanthos and S. K. Dey, Symp . On “Porous, Cellular and Microcellular Materials,” ASME Intern. Mech. Eng. Congr. And Exp., MD-Vol. 82, 75-75(1998).

12.

12. L.E. Daigneault , Y.P. Handa , B. Wong and L.M. Caron , “Solubility of Blowing Agents in Polystyrene,” National Research Council Canada, FoamTech Polymer Foams Technology Group Seminar, NJ 8/6/97.