Characterization of Wood-Polypropylene Composite Sandwich System

Abstract

A new wood-polypropylene composite sandwich was made by bonding unidirectional continuous glass fiber reinforced polypropylene (UCGPP) composite to oak wood using a thermoplastic tie layer. In order to evaluate the practical utility of wood-composite sandwich systems, the effects of moisture changes in both continuous and cyclic manner were investigated by monitoring the modulus change. Dynamic mechanical analysis (DMA) of neat wood and wood-composite sandwich was carried out under controlled relative humidity (RH) and isothermal conditions to simulate moisture desorption/sorption processes. It is observed that under continuous desorption condition the modulus increase is less in the case of wood-sandwich (20%) when compared with neat wood (35%). However, under desorption/sorption cycle conditions the wood-sandwich undergoes significant modulus change when compared with neat wood. It is inferred that while bonding wood with UCGPP composite helps reduce the variation in modulus under continuous desorption, it is not the case under cyclic moisture condition. The modulus behavior of both dry and normal wood-sandwiches at different end-use temperatures is also studied using DMA. Optical and environmental scanning electron micrographs show the distribution and penetration pattern of tie layer into wood as well as UCGPP composite, thus demonstrating the significance of micro-mechanical interlocking for bonding.

Keywords

wood-sandwich glass transition temperature tie layer plasticization penetration moisture content hardwood mechanical interlocking

Get full access to this article

View all access options for this article.

References

1. Encyclopedia of Polymer Science and Engineering : Wood, Polymeri Impregnated, John A. Meyer: Ed. H.F. Mark , N.M. Bikales , C.G. Overberger , G. Menges , J.I. Kroschwitz , Vol. 17, pp. 887-900, Second Edition.

2. E. Barbero , J. Davalos , and U. Munipalle , 1994, "Bond Strength of FRP-Wood Interface," Journal of Reinforced Plastics and Composites, Vol. 13, Sept., pp. 835-854.

3. Boehme, C. , 1976a, "The Constructive Behavior of GFK-Wood Sandwiches-Comparison of Experimental Results with Various Computation Methods," Holz Roh-Werst., Vol. 34, No. 5, pp. 155-161.

4. W. M. Bulleit , 1984, "Reinforcement of Wood Materials: A Review," Wood and Fiber Science, Vol. 16, No. 3, pp. 391-397.

5. E. N. Landis , and H. J. Dagher , 1997, "NDE and Performance Monitoring of FRP-Wood Hybrid Structures," in Proceedings of the ASCE Structures Congress XV, Portland, OR, ASCE, pp. 1504-1507.

6. P. Qiao , J. F. Davalos , and M. G. Zipfel , 1998,"Modelling and Optimal Design of Composite Reinforced Wood Railroad Crosstie," Composite Structures, Vol. 41, pp. 87-96.

7. C. Barbera Birkinshaw , M. Buggy and G. Henn , 1986, "Dynamic Mechanical Analysis of Wood," J. Mat. Sci., Vol. 5, pp. 898-900.

8. P. R. Ebrahimzadeh , 1997. "Effect of Impregnation on Mechanosorption in Wood and Paper Studied by Dynamic Mechanical Analysis," Doktorsatuhandlingar vid Chalmers Tekniska Hogskola, No. 1276, pp. 41.

9. H. Gao, 1994, "Dynamic Mechanical Analysis of Wood and Wood-Based Composites," Ph. D. Thesis, Oregon State University, USA.

10.

10. L. D. Armstrong and R. S. T. Kingston , 1960, "Effect of Moisture Changes on Creep of Wood," Nature, Vol. 185, pp. 862-863.

11.

11. L. Salmen , 1984, "Viscoelastic Properties of in-situ Lignin under Water-Saturated Conditions," J. Mat. Sci., Vol. 19, pp. 3090-3096.

12.

12. H. F. Brinson , 1995, "Measurement of Adhesive Bond Properties Including Damage by Dynamic Mechanical Thermal Analysis of a Beam Specimen," J. Adhesion, Vol. 55, pp. 17-30.

13.

13. J. Z. Wang , D. A. Dillard , M. P. Wolcott , F. A. Kamke , and G. L. Wilkes , 1990, "Transient Moisture Effects in Fibers and Composite Materials," Journal of Composite Materials, Vol. 24, pp. 994-1009.

14.

14. C. S. Own , D. Seader , N. A. D'Souza , and W. Brostow , 1998, "Cowoven Polypropylene/Glass Composites with Polypropylene + Polymer Liquid Crystal Interlayers: Dynamic Mechanical and Thermal Analysis," Polymer Composites, Vol. 19, No. 2, pp. 107-115.

15.

15. J. Karger-Kocsis , and L. Kiss , 1987, "Dynamic Mechanical Properties and Morphology of Polypropylene Block Copolymers and Polypropylene/Elastomer Blends," Polymer Eng. Sci., Vol. 27, No. 4, pp. 254-262.

16.

16. S. S. Kelley , T. G. Rials , and W. G. Glasser , 1987, "Relaxation Behavior of the Amorphous Components of Wood," J. Mat. Sci., Vol. 22, pp. 617-624.

17.

17. L. Campanella , M. Tomassetti and R. Tomellini , 1991, "Thermoanalysis of Ancient, Fresh and Waterlogged Woods," Journal of Thermal Analysis, Vol. 37, pp. 1923-1932.

18.

18. T. Yvonne , and G. Paul , 1984, "Penetration Pathways of Liquid Gallium in Wood Seen by Scanning Electron Microscopy," Wood and Fiber Science, Vol. 16, No. 3, pp. 403-410.