Analytical and Experimental Investigations on the Transient Heat Transfer Process in Moist Wood Wool Slabs

Abstract

Heat and moisture transfer in wood wool slabs (shredded wood with Portland cement binder) has been investigated both experimentally and theoretically. The purpose of this study is the analysis of the process of moisture redistribution taking place inside wood wool slabs conditioned to moisture equilibrium (e.g., in a climatic chamber) and then mounted in a guarded hot plate or heat flux meter apparatus to measure the specimen thermal resistance. A theoretical analysis of the heat and mass transfer process for such a material was performed and then a suitable numerical model was used to predict and analyse the moisture redistribution. The porous media may be modelled as a multiphase system constituted by a solid matrix and a network of interconnected pores, partly filled with liquid water and partly with moist air. Three equations have been derived: conservation of the mass of the dry air, the conservation of the mass of water species (liquid and vapour) and the energy balance. These equations have been supplemented with the thermodynamic relations and the constitutive equations needed for the closure of the model. The experimental work was performed on a slab cut into several slices. During the experimental tests, the temperature and heat flow rate data was collected both during the steady state conditions to get the thermal resistance and during the initial transient period, when the heat flow rate is continuously varying. At the end of the test, the slices were weighed to get information on the moisture redistribution. The moisture data versus heat flow rate and temperature on the two faces of the specimen, and information about the final moisture distribution were compared with those obtained by numerical simulation. Substantial agreement between numerical result and experimental data was found.

Keywords

heat transfer moisture transfer wood wool moisture redistribution vapour

Get full access to this article

View all access options for this article.

References

Baggio, P. , Campanale, M. , De Ponte, F. and Moro, L. , Trasmissione del calore nei pannelli in fibra di legno in presenza di umidità: analisi teorico—sperimentale, 51° Congresso Nazionale ATI, Udine (I), September 1996, edited by SGE, Padova (1996), 1, pp. 93–104.

Baggio, P. , Campanale, M. , De Ponte, F. and Moro, L. , Analytical and Experimental Investigations on the Heat Transfer Property of Moist Wood Wool Slabs, Proceedings of the International Symposium on Humidity and Moisture, Teddington, 6–8 April 1998, 2, edited by NPL, Teddington (1998) pp. 278–286.

Hassanizadeh, M. and Gray, W. G. , General Conservation Equations for Multiphase Systems: 1Averaging Technique, Adv. Water Res. (1979), 2, pp. 131–144.

Hassanizadeh, M. and Gray, W. G. , General Conservation Equations for Multiphase Systems: 2 Mass, Moment, Energy and Entropy Equations, Adv. Water Res. (1979), 2, pp. 191–203.

Hassanizadeh, M. and Gray, W. G. , General Conservation Equations for Multiphase Systems: 3 Constitutive Theory for Porous Media Flow, Adv. Water Res. (1980), 3, pp. 25–40.

Whitaker, S. , Simultaneous Heat Mass and Momentum Transfer in Porous Media: A Theory of Drying, Advances in Heat Transfer, Academic Press, New York (1977), 13, pp. 119–203.

Whitaker, S. , Heat and Mass Transfer in Granular Porous Media, Advances in Drying, Hemisphere, New York (1980), 1, pp. 23–61.

Baggio, P. , Maiorana, C. E. and Schrefler, B. A. , Thermo-Hygro-Mechanical Analysis of Concrete, Int. J. Num. Meth. In Fluids (1995), 20, pp. 573–595.

Baggio, P., Bonacina, C. and Strada, M., Trasporto do calore e di massa nel calcestruzzo cellulare, La Termotecnica, December 1993, pp. 53–58.

10.

Bertasi, M. , Bigolaro, G. and De Ponte, F. ,Fibrous Insulating Materials as Standard Reference Materials at Low Temperatures, inASTMSTP 660, R. P. Tye Ed., ASTM, Philadelphia (1978), pp. 30–49.

11.

Woodside, W. and Messmer, J. H. , Thermal Conductivity of Porous Media. I. Unconsolidated Sands, Journal of Applied Physics, No. 9, September 1961, 32, pp. 1688–1691.

12.

ISO/TC 163/SC 1/WG 9 N 23—Revised ISO/DIS 10051, Thermal Insulation–Moisture Effect of Heat Transfer–Determination of Thermal Transmissivity of a Moist Material (1993).

13.

Campanale, M. and Moro, L. , Simplified Procedure for the Determination of Thermal Resistance of Thick Specimens Enclosing Air Only, Journal of Thermal Insulation of Building Envelopes, October 1997, 21, pp. 153–170.

14.

Campanale, M. and De Ponte F. , Certification of Polyester Fibreboards as Reference Materials for the Measurements of Thermal Resistance CRM 124, Commission of the European Communities, BCR series, EUR 14080 EN, Luxembourg (1992).

15.

Reid, R. C. , Praunsnitz, J. M. and Bruce, E. P. , The Properties of Gases & Liquids, 4th ed., McGraw-Hill, New York, 1987.

16.

Daian, J. F. , Condensation and Isothermal Water Transfer in Cement Mortar Part I: Pore Size Distribution, Equilibrium, Water Condensation and Imbibition, Transport in Porous Media (1988), 3, pp. 563–589.

17.

Daian, J. F. , Condensation and Isothermal Water Transfer in Cement Mortar Part II: Transient Condensation of Water Vapor, Transport in Porous Media (1989), 4, pp. 1–16.

18.

Forsyth, P. A. and Simpson, R. B. , A Two-Phase, Two-Component Model for Natural Convection in A Porous Medium, Int. J. for Num. Meth. in Fluids (1991), 12, pp. 655–682.

19.

Ilic, M. and Turner, I. W. , Convective Drying of a Consolidated Slab of Wet Porous Material, Int. J. Heat Mass Transfer (1989), 32(12), pp. 957–967.