Indirect Burst Pressure Measurements for the Mechanical Assessment of Biological Vessels

Abstract

In the evaluation of tissue-engineered blood vessels (TEBVs), the utilization of the correct mechanical test to assess the burst pressure is pivotal for translation to a clinical setting. The ISO 7198 standard outlines various methods that may be implemented to evaluate the mechanical characteristics of vascular prosthetics. The gold standard is the direct measurement of the pressurized burst pressure. Two alternative indirect methods are the circumferential tensile strength (CTS) and the probe burst pressure. There are limited data validating the use of the indirect methods for their predictive capacity of the pressurized burst pressure in single biological vessel samples. We assess the two indirect methods compared with the direct pressurized burst pressure measurement, for their correlation within single biological samples, using methods presently used in literature and as they are proposed by the ISO 7198. The CTS, the probe burst pressure, and the pressurized burst pressure correlated very well (All R² > 0.89) when silicone samples were assessed, although the indirect methods resulted in a large overestimation of the burst pressure. The correlation between the three mechanical tests was poor (all R² <0.18) when arterial and venous samples were investigated. Freezing and subsequent thawing before testing had no impact on the mechanical properties of the vessels. Strain rates within the strain rate window provided by the ISO 7198 (50–200 mm/min), likewise, had no impact on the outcome of the tests. Neither the CTS nor the probe burst pressure is predictive of the pressurized burst pressure of the biological vascular tissue. Unless explicitly validated in a testing system on a range of biological tissues, the derived methods should not be utilized for the evaluation of the burst pressure of biological TEBVs for clinical purposes.

Impact Statement

Vascular tissue engineering (VTE) is a rapidly expanding field, with numerous approaches being explored both in preclinical and clinical settings. A pivotal factor in the development of VTE techniques is patient safety, notably with respect to the mechanical properties of the vessels. Of the mechanical properties, the bursting strength, representing the ability of a vessel to withstand the forces exerted on it by blood pressure, is the most important. The burst pressure is commonly assessed using one of three methods proposed by the ISO 7198. In this study, we evaluate the three burst pressure assessment methods exactly as they are presently in the field of VTE. We show that the indirect assessment methods, as they are presently used, provide inconsistent and therefore unreliable estimates of the true yield stress of a vessel.