Abstract
A perfusion bioreactor, which was designed based on fluidized bed concepts, was validated for the culture of bone constructs of clinically relevant size. For this study, natural coral has been used as three-dimensional scaffolds. This biomaterial is a microporous, biocompatible, osteoconductive, and absorbable scaffold. This perfusion bioreactor provided a stable environment in terms of osmolarity, pH, and, most importantly, oxidative stress. Bone constructs engineered in this system resulted in significantly higher cell proliferation and homogenous cell distribution than those cultured under static conditions. Particularly relevant to the production of bioengineered bone in a clinical setting, custom-made bone constructs (each one with volume up to 30 cm3) could be produced using a such perfusion bioreactor. Last, but not least, the bone constructs of clinically relevant volume thus produced were shown to be osteogenic when transplanted subcutaneously in sheep.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
