Restricted accessResearch articleFirst published online 2024-10
Enhancing the Versatility and Performance of Soft Robotic Grippers,Hands,and Crawling Robots Through Three-Dimensional-Printed Multifunctional Buckling Joints
Soft robotic grippers and hands offer adaptability, lightweight construction, and enhanced safety in human–robot interactions. In this study, we introduce vacuum-actuated soft robotic finger joints to overcome their limitations in stiffness, response, and load-carrying capability. Our design—optimized through parametric design and three-dimensional (3D) printing—achieves high stiffness using vacuum pressure and a buckling mechanism for large bending angles (>90°) and rapid response times (0.24 s). We develop a theoretical model and nonlinear finite-element simulations to validate the experimental results and provide valuable insights into the underlying mechanics and visualization of the deformation and stress field. We showcase versatile applications of the buckling joints: a three-finger gripper with a large lifting ratio (∼96), a five-finger robotic hand capable of replicating human gestures and adeptly grasping objects of various characteristics in static and dynamic scenarios, and a planar-crawling robot carrying loads 30 times its weight at 0.89 body length per second (BL/s). In addition, a jellyfish-inspired robot crawls in circular pipes at 0.47 BL/s. By enhancing soft robotic grippers' functionality and performance, our study expands their applications and paves the way for innovation through 3D-printed multifunctional buckling joints.
Get full access to this article
View all access options for this article.
References
1.
RusD, TolleyMT. Design, fabrication and control of soft robots. Nature, 2015; 521:467–475.
PagoliA, ChapelleF, Corrales-RamonJ-A, et al.Review of soft fluidic actuators: classification and materials modeling analysis. Smart Mater Struct, 2021; 31:013001.
4.
WalkerJ, ZidekT, HarbelC, et al.Soft robotics: A review of recent developments of pneumatic soft actuators. Actuators, 2020; 9:3.
5.
FangJ, ZhuangY, LiuK, et al.A shift from efficiency to adaptability: Recent progress in biomimetic interactive soft robotics in wet environments. Adv Sci (Weinh), 2022; 9:e2104347.
6.
ZhouL, RenL, ChenY, et al.Bio-inspired soft grippers based on impactive gripping. Adv Sci, 2021; 2021:2002017.
7.
MutluR, AliciG, PanhuisMIH, et al.3D printed flexure hinges for soft monolithic prosthetic fingers. Soft Robot, 2016; 3:120–133.
8.
HussainI, MalvezziM, GanD, et al.Compliant gripper design, prototyping, and modeling using screw theory formulation. Int J Robot Res, 2021; 40:55–71.
9.
TawkC, GillettA, in het PanhuisM, et al.A 3D-printed omni-purpose soft gripper. IEEE Trans Robot, 2019; 35:1268–1275.
10.
TawkC, SpinksGM, in het PanhuisM, et al. In: 2019. IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). IEEE: pp. 50–55; doi: 10.1109/AIM.2019.8868382
11.
GundermanA, CollinsJ, MyersA, et al.Tendon-driven soft robotic gripper for Blackberry harvesting. IEEE Robot Autom Lett, 2022; 7:1.
12.
PollayilGJ, MengX, KepplerM, et al.Elastic structure preserving impedance control for nonlinearly coupled tendon-driven systems. IEEE Control Syst Lett, 2022; 6:1982–1987.
13.
RenZ, Kim S JiX, et al.A high-lift micro-aerial-robot powered by low-voltage and long-endurance dielectric elastomer actuators. Adv Mater, 2022; 34:2106757.
14.
HwangG, ParkJ, CortesDSD, et al.Electroadhesion-based high-payload soft gripper with mechanically strengthened structure. IEEE Trans Ind Electron, 2022; 69:642–651.
15.
ShintakeJ, RossetS, SchubertB, et al.Versatile soft grippers with intrinsic electroadhesion based on multifunctional polymer actuators. Adv Mater, 2016; 28:231–238.
16.
LiuL, ZhangJ, CaiY, et al.Stiffness-tunable robotic gripper driven by dielectric elastomer composite actuators. Smart Mater Struct, 2020; 29:125013.
17.
ChattarajR, KhanS, BhattacharyaS, et al.Development of two jaw compliant gripper based on hyper-redundant approximation of IPMC actuators. Sens Actuators A Phys, 2016; 251:207–218.
18.
ChenC-T, PengR-C. Design and 3D printing of paper-based shape memory polymer actuated for soft lightweight fingers. Smart Mater Struct, 2021; 30:075010.
19.
Wang W LiC, ChoM, et al.Soft tendril-inspired grippers: Shape morphing of programmable polymer–paper bilayer composites. ACS Appl Mater Interfaces, 2018; 10:10419–10427.
20.
ZhangYF, ZhangN, HingoraniH, et al.Fast-response, stiffness-tunable soft actuator by hybrid multimaterial 3D printing. Adv Funct Mater, 2019; 29:1806698.
21.
LotfianiA, ZhaoH, ShaoZ, et al.Torsional stiffness improvement of a soft pneumatic finger using embedded skeleton. J Mech Robot, 2020; 12:011016.
22.
WangX, ZhouH, KangH, et al.Bio-inspired soft bistable actuator with dual actuations. Smart Mater Struct, 2021; 30:125001.
23.
Wu Z LiX, GuoZ. A novel pneumatic soft gripper with a jointed endoskeleton structure. Chin J Mech Eng, 2019; 32:78.
24.
FatahillahM, OhN, RodrigueH. A novel soft bending actuator using combined positive and negative pressures. Front Bioeng Biotechnol, 2020; 8:472.
25.
TawkC, in het PanhuisM, SpinksGM, et al.Bioinspired 3d printable soft vacuum actuators for locomotion robots, grippers and artificial muscles. Soft Robot, 2018; 5:685–694.
26.
SubramaniamV, JainS, AgarwalJ, et al.Design and characterization of a hybrid soft gripper with active palm pose control. Int J Robot Res, 2020; 39:1668–1685.
27.
ZhuJ, FeiW, DingH, et al.In: 2021 27th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE: Auckland, New Zealand; 2021; pp. 682–687; doi: 10.1109/M2VIP49856.2021.9665057
28.
WangH, Abu-DakkaFJ, Nguyen LeT, et al.A novel soft robotic hand design with human-inspired soft palm: Achieving a great diversity of grasps. IEEE Robot Autom Mag, 2021; 28:37–49.
29.
ChenSH.Soft Robot Hands Development and Control for a Dual Robot Hand-Arm System. M.S. Thesis. National Taiwan University; 2022.
30.
GuG, Zhang N XuH, et al.A soft neuroprosthetic hand providing simultaneous myoelectric control and tactile feedback. Nat Biomed Eng, 2021; 7:589–598.
31.
LiuX, ZhaoY, GengD, et al.Soft humanoid hands with large grasping force enabled by flexible hybrid pneumatic actuators. Soft Robot, 2021; 8:175–185.
32.
HombergBS, KatzschmannRK, DogarMR, et al.Robust proprioceptive grasping with a soft robot hand. Auton Robots, 2019; 43:681–696.
33.
FrasJ, NohY, WurdemannH, et al.In: 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE: Vancouver, BC, Canada; 2017; pp. 5610–5615; doi: 10.1109/IROS.2017.8206448
34.
TeepleCB, KoutrosTN, GrauleMA, et al.Multi-segment soft robotic fingers enable robust precision grasping. Int J Robot Res, 2020; 39:1647–1667.
35.
RobertsonMA, PaikJ. In: 2018 IEEE International Conference on Soft Robotics (RoboSoft). IEEE: Livorno, Italy; 2018; pp. 431–436; doi: 10.1109/ROBOSOFT.2018.8405364
36.
SunT, ChenY, HanT, et al.A soft gripper with variable stiffness inspired by pangolin scales, toothed pneumatic actuator and autonomous controller. Robot Comput Integr Manuf, 2020; 61:101848.
37.
ElgeneidyK, LohseN, JacksonM. Bending angle prediction and control of soft pneumatic actuators with embedded flex sensors—A data-driven approach. Mechatronics, 2018; 50:234–247.
38.
SachinS, WangZK, HiraiS. Analytical modeling of a soft pneu-net actuator subjected to planar tip contact. IEEE Trans Robot, 2022; 38:2720–2733.
39.
CuiYF, LiuXJ, DongXG, et al.Enhancing the universality of a pneumatic gripper via continuously adjustable initial grasp postures. IEEE Trans Robot, 2021; 37:1604–1618.
40.
KaliskyT, WangY, ShihB, et al.In: 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE: Vancouver, BC, Canada; 2017; pp. 6207–6213; doi: 10.1109/IROS.2017.8206523
41.
KimW, EomJ, ChoK-J. A Dual-Origami design that enables the quasisequential deployment and bending motion of soft robots and grippers. Adv Intell Syst, 2022; 4:2100176.
42.
GorissenB, ReynaertsD, KonishiS, et al.Elastic inflatable actuators for soft robotic applications. Adv Mater, 2017; 29:1604977.
43.
NarangYS, DegirmenciA, VlassakJJ, et al.Transforming the dynamic response of robotic structures and systems through laminar jamming. IEEE Robot Autom Lett, 2018; 3:688–695.
44.
AokiM, JuangJ-Y. Forming three-dimensional closed shapes from two-dimensional soft ribbons by controlled buckling. R Soc Open Sci, 2018; 5:171962.
45.
XuS, YanZ, JangK-I, et al.Assembly of micro/nanomaterials into complex, three-dimensional architectures by compressive buckling. Science, 2015; 347:154–159.
46.
KimH, Ahn, S-k, MackieDM, et al.Shape morphing smart 3D actuator materials for micro soft robot. Mater Today, 2020; 41:243–269.
47.
ShepherdRF, IlievskiF, ChoiW, et al.Multigait soft robot. Proc Natl Acad Sci U S A, 2011; 108:20400–20403.
48.
YehCY, ChouSC, HuangHW, et al.Tube-crawling soft robots driven by multistable buckling mechanics. Extreme Mech Lett, 2019; 26:61–68.
49.
YehC-Y, ChenC-Y, JuangJ-Y. Soft hopping and crawling robot for in-pipe traveling. Extreme Mech Lett, 2020; 39:100854.
ChenQ, Feng F LvP, et al.Origami spring-inspired shape morphing for flexible robotics. Soft Robot, 2022; 9:798–806.
52.
KaufmannJ, BhovadP, LiS. Harnessing the multistability of kresling origami for reconfigurable articulation in soft robotic arms. Soft Robot, 2022; 9:212–223.
53.
HuW, AliciG. Bioinspired three-dimensional-printed helical soft pneumatic actuators and their characterization. Soft Robot, 2020; 7:267–282.
54.
XieR, SuM, ZhangY, et al.In: 2018 IEEE International Conference on Robotics and Automation (ICRA). Brisbane, Australia; 2018; pp. 3448–3453; doi: 10.1109/ICRA.2018.8461189
55.
JinT, LiL, WangT, et al.Origami-inspired soft actuators for stimulus perception and crawling robot applications. IEEE Trans Robot, 2022; 38:748–764.
56.
JiaoZ, JiC, ZouJ, et al.Vacuum-powered soft pneumatic twisting actuators to empower new capabilities for soft robots. Adv Mater Technol, 2019; 4:1800429.
57.
WangN, ChenB, GeX, et al.Modular crawling robots using soft pneumatic actuators. Front Mech Eng, 2020; 16:163–175.
58.
TangY, ChiY, SunJ, et al.Leveraging elastic instabilities for amplified performance: Spine-inspired high-speed and high-force soft robots. Sci Adv, 2020; 6:eaaz6912.
59.
SatoH, UchiyamaK, ManoY, et al.Development of a compact pneumatic valve using rotational motion for a pneumatically driven mobile robot with periodic motion in a pipe. IEEE Access, 2021; 9:165271–165285.
60.
TaniseY, KishiT, YamazakiS, et al.In: 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). Banff, Alberta, Canada; 2016; pp. 1234–1239; doi: 10.1109/AIM.2016.7576939
61.
ZhangZ, WangX, WangS, et al.Design and modeling of a parallel-pipe-crawling pneumatic soft robot. IEEE Access, 2019; 7:134301–134317.
62.
YamamotoT, SakamaS, KamimuraA. pneumatic duplex-chambered inchworm mechanism for narrow pipes driven by only two air supply lines. IEEE Robot Autom Lett, 2020; 5:5034–5042.
63.
AdamsW, SridarS, ThalmanCM, et al. In: 2018. IEEE International Conference on Soft Robotics (RoboSoft). 2018; pp. 321–326; doi: 10.1109/ROBOSOFT.2018.8404939
64.
ZouJ, FengM, DingN, et al.Muscle-fiber array inspired, multiple-mode, pneumatic artificial muscles through planar design and one-step rolling fabrication. Natl Sci Rev, 2021; 8:nwab048.
65.
TakeshimaH, TakayamaT. In: 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE: Hamburg, Germany;. 2015; pp. 1125–1130; doi: 10.1109/IROS.2015.7353511
66.
QiX, ShiH, PintoT, et al.A novel pneumatic soft snake robot using traveling-wave locomotion in constrained environments. IEEE Robot Autom Lett, 2020; 5:1610–1617.
67.
LoS-Y, ChengC-A, HuangH-P. Virtual impedance control for safe human-robot interaction. J Intell Robot Syst, 2016; 82:3–19.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
