Currently, pneumatic soft actuators are widely used due to their impressive adaptability, but they still face challenges for more extensive practical applications. One of the primary issues is the bulky and noisy air compressors required to generate air pressure. To circumvent this critical problem, this work proposes a new type of air pressure source, based on the vapor pressure at the gas–liquid equilibrium to replace conventional air pumps. Compared with the previous phase transition method, this approach gains advantages such as generating gas even at low temperatures (instead of boiling point), more controllable gas output, and higher force density (since both ammonia and water contribute to the gas pressure). This work built mathematical models to explain the mechanism of converting energy to output action force from electrical energy and found the aqua ammonia system is one of the optimal choices. Multiple prototypes were created to demonstrate the capability of this method, including a pouch actuator that pushed a load 20,555 times heavier than its dead weight. Finally, based on the soft actuator, an untethered crawling robot was implemented with onboard batteries, showing the potentially extensive applications of this methodology.
WuY, LiuM, ZhangG, et al.Study on high frequency response characteristics of a moving-coil-type linear actuator using the coils combinations. IJHM, 2022; 5(3):226–242.
3.
XiangP, YanL, GuoY, et al.A concentrated-flux-type pm machine with irregular magnets and iron poles. IEEE/ASME Trans Mechatron, 2024; 29(1):691–702.
ZouJ, LinY, JiC, et al.A reconfigurable omnidirectional soft robot based on caterpillar locomotion. Soft Robotics, 2018; 5(2):164–174.
8.
JiaoZ, ZhangC, WangW, et al.Advanced artificial muscle for flexible material‐based reconfigurable soft robots. Adv Sci (Weinh), 2019; 6(21):1901371.
9.
GeL, ChenF, WangD, et al.Design, modeling, and evaluation of fabric-based pneumatic actuators for soft wearable assistive gloves. Soft Robotics, 2020; 7(5):583–596.
10.
WehnerM, TrubyRL, FitzgeraldDJ, et al.An integrated design and fabrication strategy for entirely soft, autonomous robots. Nature, 2016; 536(7617):451–455.
11.
WangH, YorkP, ChenY, et al.Biologically inspired electrostatic artificial actuators for insect-sized robots. The International Journal of Robotics Research, 2021; 40(6–7):895–922.
12.
TolleyMT, RobertSF, MichaelK, et al.An untethered jumping soft robot. In: IEEE/RSJ International Conference on Intelligent Robots and Systems. IEEE; 2014; 561–566.
13.
WangH, AkioY, HiguchiT. Electrostatic-motor-driven electroadhesive robot. In: IEEE/RSJ International Conference on Intelligent Robots and Systems. IEEE; 2012; 914–919.
14.
CvetkovicC, RamanR, ChanV, et al.Three-dimensionally printed biological machines powered by skeletal actuator. Proc Natl Acad Sci USA, 2014; 111(28):10125–10130.
15.
KangR, GuoY, ChenL, et al.Design of a pneumatic muscle based continuum robot with embedded tendons. IEEE/ASME Trans Mechatron, 2017; 22(2):751–761.
16.
GhafoorA, DaiJS, DuffyJ. Stiffness modeling of the soft-finger contact in robotic grasping. J. Mech. Des, 2004; 126(4):646–656.
17.
BoyvatM, VogtDM, WoodRJ. Ultrastrong and high-stroke wireless soft actuators through liquid-gas phase change. Adv Materials Technologies, 2019; 4(2):1800381.
18.
LinY, ZhangC, TangW, et al.A bioinspired stress‐response strategy for high‐speed soft grippers. Advanced Science, 2021; 8(21):2102539.
BhandariB, LeeGY, AhnSH. A review on IPMC material as actuators and sensors: Fabrications, characteristics and applications. Int J Precis Eng Manuf, 2012; 13(1):141–163.
21.
NguyenCT, PhungH, NguyenTD, et al.Multiple-degrees-of-freedom dielectric elastomer actuators for soft printable hexapod robot. Sensors and Actuators A-Physical, 2017; 267:505–516.
22.
KunzeJ, PrechtlJ, BruchD, et al.Design, manufacturing, and characterization of thin, core-free, rolled dielectric elastomer actuators. Actuators. MDPI, 2021; 10:69.
23.
WeiD, XiongQ, DongJ, et al.Electrostatic adhesion clutch with superhigh force density achieved by mxene-poly (vinylidene fluoride–trifluoroethylene–chlorotrifluoroethylene) composites. Soft Robotics, 2023; 10(3):482–492.
24.
XieG, FanD, WangH, et al.Strong reliable electrostatic actuation based on self-clearing using a thin conductive layer. Soft Robot, 2023; 10(4):797–807.
25.
QianP, LiuL, PuC, et al.Methods to improve motion servo control accuracy of pneumatic cylinders-review and prospect. IJHM, 2023; 6(3):274–310.
26.
LeeJG, RodrigueH. Origami-based vacuum pneumatic artificial actuators with large contraction ratios. Soft Robot, 2019; 6(1):109–117.
27.
PolygerinosP, WangZ, GallowayKC, et al.Soft robotic glove for combined assistance and at-home rehabilitation. Robotics and Autonomous Systems, 2015; 73:135–143.
28.
DrotmanD, JadhavS, SharpD, et al.Electronics-free pneumatic circuits for controlling soft-legged robots. Sci Robot, 2021; 6(51):eaay2627.
MiriyevA, StackK, LipsonH. Soft material for soft actuators. Nat Commun, 2017; 8(1):596.
31.
NakaharaK, NarumiK, NiiyamaR, et al.Electric phase-change actuator with inkjet printed flexible circuit for printable and integrated robot prototyping. 2017 IEEE International Conference on Robotics and Automation (ICRA). IEEE; 2017; 1856–1863.
32.
LongF, ChengY, RenY, et al.Latest advances in development of smart phase change material for soft actuators. Adv Eng Mater, 2022; 24(3):2100863.
33.
LiH, YaoJ, ZhouP, et al.High-load soft grippers based on bionic winding effect. Soft Robot, 2019; 6(2):276–288.
34.
TawkCY. 3D printed pneumatic soft actuators and sensors: their modeling, performance quantification, control and applications in soft robotic systems. Doctor of Philosophy thesis, School of Mechanical, Material, Mechatronic and Biomedical Engineering, University of Wollongong, 2019.
35.
ParkYL, SantosJ, GallowayKG, et al.A soft wearable robotic device for active knee motions using flat pneumatic artificial actuators. 2014 IEEE International Conference on Robotics and Automation (ICRA), 2014; 4805–4810.
36.
MoseleyP, FlorezJM, SonarHA, et al.Modeling, design, and development of soft pneumatic actuators with finite element method . Adv Eng Mater, 2015; 18(6):978–988.
37.
WangZ, PolygerinosP, OverveldeJTB, et al.Interaction forces of soft fiber reinforced bending actuators. IEEE/ASME Trans Mechatron, 2017; 22(2):717–727.
38.
GuoJ, SunY, LiangX, et al.Design and fabrication of a pneumatic soft robotic gripper for delicate surgical manipulation. 2017 IEEE International Conference on Mechatronics and Automation (ICMA). IEEE; 2017; 1069–1074.
39.
GuoXY, LiWB, GaoQH, et al.Self-locking mechanism for variable stiffness rigid–soft gripper. Smart Mater Struct, 2020; 29(3):35033.
40.
LauraP, GunjanA, JamieP. Design and analysis of a soft pneumatic actuator with origami shell reinforcement. Soft Robotics, 2016; 3:109–119.
41.
LiX, ChenY, YangY, et al.Passive particle jamming and its stiffening of soft robotic grippers. IEEE Trans Robot, 2017; 33(2):446–455.
42.
XieZ, DomelAG, AnN, et al.Octopus arm-inspired tapered soft actuators with suckers for improved Graspin. Soft Robot, 2020; 7(5):639–648.
43.
SantosoJ, CagdasDO. An origami continuum robot capable of precise motion through torsionally stiff body and smooth inverse kinematics. Soft Robot, 2021; 8(4):371–386.
44.
ChengNG, LobovskyMB, KeatingSJ, et al.Design and analysis of a robust, low-cost, highly articulated manipulator enabled by jamming of granular media. 2012 IEEE international conference on robotics and automation. IEEE, 2012; 4328–4333.
45.
LiH, YaoJ, ZhouP, et al.High-force soft pneumatic actuators based on novel casting method for robotic applications. Sens Actuators A: Physi, 2020; 306:111957.
46.
HuW, MutluR, LiW, et al.A structural optimisation method for a soft pneumatic actuator. Robotics, 2018; 7(2):24.
47.
ChellattoanR, YudhantoA, LubineauG. Low-voltage-driven large-amplitude soft actuators based on phase transition. Soft Robot, 2020; 7(6):688–699.
48.
HanJ, JiangW, NiuD, et al.Untethered soft actuators by liquid–vapor phase transition: Remote and programmable actuation. Adva Intelli Systems, 2019; 1(8):1900109.
49.
MederF, NaselliGA, SadeghiA, et al.Remotely light‐powered soft fluidic actuators based on plasmonic‐driven phase transitions in elastic constraint. Advan Materi, 2019; 31(51):1905671.
50.
ShaoY, LongF, ZhaoZ, et al.4D printing light-driven soft actuators based on liquid-vapor phase transition composites with inherent sensing capability. Che Engi J, 2023; 454:140271.
51.
UlanowiczRE. Mass and energy flow in closed ecosystems. J Theor Biol, 1972; 34(2):239–253.
52.
MirvakiliSM, SimD, HunterIW, et al.Actuation of untethered pneumatic artificial muscles and soft robots using magnetically induced liquid-to-gas phase transitions. Sci Robot, 2020; 5(41):eaaz4239.
53.
FortesAD, BrodholtJP, WoodIG, et al.Ab initio simulation of ammonia monohydrate (NH3⋅H2O) and ammonium hydroxide (NH4OH). J Chem Phys, 2001; 115(15):7006–7014.
54.
BrownTL. Chemistry: The Central Science. Pearson Education; 2009.
55.
MoranMJ, ShapiroHN, BoettnerDD, et al.Fund Engin Thermodynamics. John Wiley & Sons; 2010.
56.
RoneyN, LladosF. Toxicological profile for ammonia. 2004.
57.
JiaoY, NiuL, MaS, et al.Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance. Prog Polym Sci, 2017; 71:53–90.
58.
MackayD, ShiuWY. A critical review of Henry’s law constants for chemicals of environmental interest. J Physi Chem Reference Data, 1981; 10(4):1175–1199.
59.
DardeV, ThomsenK, van WellWJM, et al.Comparison of two electrolyte models for the carbon capture with aqueous ammonia. Inter J Greenhouse Gas Control, 2012; 8:61–72.
60.
RodgersRC, HillGE. Equations for vapour pressure versus temperature: Derivation and use of the antoine equation on a hand-held programmable calculator. Br J Anaesth, 1978; 50(5):415–424.
61.
TonduB. Modelling of the McKibben artificial actuator: A review. Journal of Intelligent Material Systems and Structures, 2012; 23(3):225–253.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
