Abstract
Soft actuators that operate with overpressure have been successfully implemented as soft robotic grippers. Naturally, as these pneumatic devices are prone to cuts, self-healing properties are attractive. Here, we prepared a gripper that operates based on the liquid-gas phase transition of ethanol within its hollow structure. The gripping surface of the device is coated with a self-healing polymer that heals with heat. This gripper also includes a stainless steel wire along the device that heats the entire structure through resistive heating. This design results in a soft robotic gripper that actuates and heals in parallel driven by the same practical stimulus, that is, electricity. Compared to other self-healing soft grippers, this approach has the advantage of being simple and having autonomous self-healing. However, there remain fundamental drawbacks that limit its implementation. The current work critically assesses this overpressure approach and concludes with a broad perspective regarding self-healing soft robotic grippers.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
