Abstract
Dielectric elastomer actuators (DEAs) are widely used to drive soft machines, and optimal design is required in more advanced designs of soft robots. In this research article, a computational approach is originally proposed and validated for the topology optimization of electrodes of DEAs. The nonlinear finite elements of absolute nodal coordinate formulation are applied to model the dynamic electromechanical behaviors of DEAs. The parameterized level set method is employed to optimize the electrode topology of DEAs. Then, the method of system-wise equivalent static load is employed to convert the optimization problem of dynamic responses into the static one. Based on the sensitivity analysis, the normal velocity field for optimizing the electrode topology is derived. Finally, two case studies are presented to validate the proposed optimization approach. The experimental test is also performed, and the measured results are compared with the numerical ones to further validate the proposed methodology.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
