Abstract
Voxel-based structures provide a modular, mechanically flexible periodic lattice, which can be used as a soft robot through internal deformations. To engage these structures for robotic tasks, we use a finite element method to characterize the motion caused by deforming single degrees of freedom and develop a reduced kinematic model. We find that nodes of the periodic lattice move in patterns along geometric planes, primarily along translational degrees of freedom. The resulting kinematic model frames the structural deformations in terms of user-defined control and end-effector nodes, which further reduces the model size. The derived Planes of Motion model can be equivalently used for forward and inverse kinematics, as demonstrated by the design of a voxel-based robotic gripper, and an in-depth design of a voxel-based robotic locomotor. The locomotive robot follows a tripod stable gait and the quasi-static model is validated with physical experiments.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
