Abstract
With advances in mobile computing and virtual/augmented reality technologies, communicating through touch using wearable haptic devices is poised to enrich and augment current information delivery channels that typically rely on sight and hearing. To realize a wearable haptic device capable of effective data communication, both ergonomics and haptic performance (i.e., array size, bandwidth, and perception accuracy) are essential considerations. However, these goals often involve challenging and conflicting requirements. We present an integrated approach to address these conflicts, which includes incorporating multilayered dielectric elastomer actuators, a lumped-parameter model of the skin, and a wearable frame in the design loop. An antagonistic arrangement—consisting of an actuator deforming the skin—was used to achieve effective force transmission while maintaining a low profile, and the effect of the wearable frame and structure was investigated through lumped-model analysis and human perception studies.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
