Abstract
To allow versatile manipulation of soft robots made of compliant materials with limited force transmission, variable stiffness has been actively developed, which has become one of the most important factors in soft robotics. Variable stiffness is usually achieved by a jamming mechanism using layers, granules, or chain structures, through vacuum pressure or cable-driven mechanism due to its simple and rapid actuation. However, such jamming mechanisms are not suitable for actual robotic applications that require large supporting forces or drastic changes in stiffness. In this article, a hybrid jamming structure that combines granules and a rigid chain structure is proposed to simultaneously increase the average stiffness change in all directions and the maximum force in a certain direction. The improved performance of the proposed structure was compared to that of conventional granular and chain jamming structures. Based on the analytical model of the proposed structure, the principles for designing the hybrid jamming structure were derived and experimentally verified. Finally, based on the hybrid jamming structures, a multilink hybrid jamming structure was developed as a wearable system to assist the upper limbs and a robotic arm structure.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
