Abstract
A compliant three-dimensional (3D)-printed soft gripper is designed based on the bioinspired spiral spring in this study. The soft gripper is then 3D-printed using a suitable thermoplastic filament material to deliver the desired performance. The sensorless mechanism introduced in this study provides adequate compliance with a single linear actuator for interacting with delicate objects, such as manipulation of human biological materials and fruit picking. The kinematic and dynamic models of the monolithic gripper are derived analytically as well as by means of finite element analysis to synthesize its functionality. The fabricated gripper module is installed on a robot arm to demonstrate the efficacy of design for picking and placing fruits without damaging them. The presented mechanism could be customized and used in the medical and agricultural sectors with diverse geometry objects.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
