Abstract
Dynamic stiffness tuning is a promising approach for shape reconfigurable systems that must adapt their flexibility in response to changing operational requirements. Among stiffness tuning technologies, phase change materials are particularly promising because they are size scalable and can be powered using portable electronics. However, the long transition time required for phase change is a great limitation for most applications. In this study, we address this by introducing a rapidly responsive variable rigidity module with a low melting point material and flexible thermoelectric device (f-TED). The f-TED can conduct bidirectional temperature control; thereby, both heating and cooling were accomplished in a single device. By performing local cooling, the phase transition time from liquid to solid is reduced by 77%. The module in its rigid state shows 14.7 × higher bending stiffness than in the soft state. The results can contribute to greatly widening the application of phase transition materials for variable rigidity.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
