Abstract
In this work, we present an injection molded soft total artificial heart (sTAH) produced from high-temperature vulcanizing silicone using an industrial metal injection mold. At 60 beats per minute, the sTAH exhibited a total cardiac output of over 16 L/min against physiological pressures on a mock circulation and was pumped continuously for 110,000 actuation cycles. Finite element analysis was used to identify stress concentrations within the sTAH, allowing an optimized design to be proposed.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
