Abstract
Soft actuators producing large motion in a short time are mostly based on stretchable polymers actuated by pneumatic pressure; they consist of bulky components, including a motor, pump/compressor, tubes, and valves. In this study, we develop a fast-responding large-amplitude soft actuator, based on a liquid–gas phase transition, which produces a compact system. The required pressure is generated solely by the electrically induced phase transition of a fluid in a cavity, mimicking the thigmonastic movements found in plants. We discuss the critical design variables to improve the performance and propose a new design for the electrodes, which are the most critical components. Our bending actuator produces large motion in <7 s, using a low-voltage source (<50 V) that allows a much faster response than the soft actuators based on phase transition currently available.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
