Abstract
Soft climbing robots have attracted much attention of researchers for their potential applications on the wall or inside the tube. However, making a soft robot climb on the outer surface of a rod or tube by agile and efficient motion has long been a challenge. Inspired by the winding climbing locomotion of arboreal snakes, a tethered pneumatic-actuated winding-styled soft rod-climbing robot that consists of two winding actuators and a telescopic actuator is proposed in this work. Based on constant curvature assumption, we develop a theoretical model to analyze the linear and bending motion of the actuators. We demonstrate that our robot can perform climbing locomotion similar to snakes, including turning around a corner along a rod, climbing a vertical rod with a maximum speed of 30.85 mm/s (0.193 body length/s), and carrying a larger payload (weight, 500 g, more than 25 times its self-weight) than existing soft climbing robots do on a vertical surface. In addition, the experimental tests exhibit the potential applications of the robot in special environments such as high-voltage cables, nuclear power plants, and underwater sites.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
