Abstract
Abstract
A key challenge in bioinspired insect-scale running robots is to make them both agile and resilient. In this study, we develop a dielectric elastomer actuated soft robot that mimics inchworms. We use an elastomer to make the soft body, a stretchable dielectric to provide electrostatic actuation of high power density, and multizone actuation to achieve ratcheting locomotion. We fabricate the body, muscles, and feet in a single piece, with no internal open space. The robot runs four times its body length per second and turns at a radius about three times its body length in 0.3 s. The robot survives compression 30,000 times its own weight and survives collision with a rigid surface at a speed of 30 m/s. The robot can climb a slope of 30°. Walking on a horizontal plane, the robot carries a payload four times its own weight. The robot can operate on land, underwater, and in vacuum. The simplicity in design and fabrication will enable the robot to serve as a model system to investigate insect-scale actuation and locomotion, as well as the social behavior of swarms of robots. The robot also provides a platform to integrate wireless charging, mobile communication, and stretchable electronics.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
