Abstract
Abstract
The improvement of the load capacity of soft grippers has always been a challenge. To tackle this load capacity challenge, this work presents four novel types of high-load (HL) soft grippers that are bioinspired by bionic winding models. The winding models are found commonly in many animals and plants, where different winding patterns are used to grip different objects. Inspired by the winding models, we design four bionic winding structures that are driven by pneumatic artificial muscles (PAMs), and then four HL soft grippers are formed out of the winding structures. The inner cavities of the HL soft grippers contract after the PAMs are inflated, which enables objects to be wrapped to achieve gripping. Compared with most existing soft grippers, the HL soft grippers have a higher load capacity, and they can also grip various objects that have different shapes and stiffnesses without damaging them. In addition, in man–machine collaboration, operators can be in direct contact with them without being hurt. Our study helps lay the foundation for engineered systems with bionic winding structures.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
