Abstract
Abstract
Conventional robots are typically actuated by hard actuators, while biological entities consist mostly of soft muscles. Being soft imparts a functionality of compliance, thereby greatly enhancing the range of actuation and the degrees of freedom. Here, we demonstrate a soft electromechanically-active polymer capable of an electrically-induced linear strain beyond 500% that is continuously tunable by voltage. Previous experiments on the same material have demonstrated that by harnessing and bypassing electromechanical instability, soft electroactive polymers may bi-stably switch between an actuated state and an uncharged state of about 323% linear strain. In this paper, we use theory to inspire the possibility of suppressing electromechanical instability using pre-stretch by applying a non-isotropic pre-stretch onto the membrane, so as to achieve an ultra-large actuation strain that is continuously tunable by voltage. This geometry that enables such a large magnitude of actuation is simple and highly amenable to integration in robotic systems. With an electrically-induced strain of at least two orders of magnitude larger than conventional actuators, we expect our demonstration to expand the range of application for soft actuators.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
