A pneumatically powered, fully untethered mobile soft robot is described. Composites consisting of silicone elastomer, polyaramid fabric, and hollow glass microspheres were used to fabricate a sufficiently large soft robot to carry the miniature air compressors, battery, valves, and controller needed for autonomous operation. Fabrication techniques were developed to mold a 0.65-meter-long soft body with modified Pneu-Net actuators capable of operating at the elevated pressures (up to 138 kPa) required to actuate the legs of the robot and hold payloads of up to 8 kg. The soft robot is safe to interact with during operation, and its silicone body is innately resilient to a variety of adverse environmental conditions including snow, puddles of water, direct (albeit limited) exposure to flames, and the crushing force of being run over by an automobile.
Get full access to this article
View all access options for this article.
References
1.
TrivediD, RahnCD, KierWM, WalkerID. Soft robotics: Biological inspiration, state of the art, and future research. Applied Bionics and Biomechanics, 2008; 5(3):99–117.
2.
ChoK-J, KohJ-S, KimS, ChuW-S, HongY, AhnS-H. Review of manufacturing processes for soft biomimetic robots. International Journal of Precision Engineering and Manufacturing, 2009; 10(3):171–181.
3.
PfeiferR, LungarellaM, IidaF. The challenges ahead for bio-inspired soft robotics. Commun ACM, 2012; 55(11):76–87.
4.
KimS, LaschiC, TrimmerB. Soft robotics: a bioinspired evolution in robotics. Trends Biotechnol, 2013; 31(5):287–294.
5.
LipsonH. Challenges and opportunities for design, simulation, and fabrication of soft robots. Soft Robotics, 2013; 1(P):21–27.
6.
MajidiC. Soft robotics: A perspectivecurrent trends and prospects for the future. Soft Robotics, 2013; 1(P):5–11.
7.
ShepherdRF, IlievskiF, ChoiW, MorinSA, StokesAA, MazzeoAD, ChenX, WangM, WhitesidesGM. Multigait soft robot. Proceedings of the National Academy of Sciences, 2011; 108(51):20400–20403.
StokesAA, ShepherdRF, MorinSA, IlievskiF, WhitesidesGM. A hybrid combining hard and soft robots. Soft Robotics, 2013; 1(P):70–74.
10.
MartinezRV, BranchJL, FishCR, JinL, ShepherdRF, NunesR, SuoZ, WhitesidesGM. Robotic tentacles with three-dimensional mobility based on flexible elastomers. Advanced Materials, 2013; 25(2):205–212.
11.
MarcheseAD, OnalCD, RusD. Autonomous soft robotic fish capable of escape maneuvers using fluidic elastomer actuators. Soft Robotics, 2014; 1(1):75–87.
12.
OnalCD, ChenX, WhitesidesGM, RusD. Soft mobile robots with on-board chemical pressure generation. In International Symposium on Robotics Research, 2011, pp. 1–16.
13.
OnalCD, RusD. Autonomous undulatory serpentine locomotion utilizing body dynamics of a fluidic soft robot. Bioinspir Biomim, 2013; 8(2):026003.
ChangC-L, LeeHS-J, ChenC-K. Nucleophilic cleavage of crosslinked polysiloxanes to cyclic siloxane monomers: Mild catalysis by a designed polar solvent system. Journal of Polymer Research, 2005; 12(6):433–438.
17.
OldfieldD, SymesT. Long term natural ageing of silicone elastomers. Polymer Testing, 1996; 15(2):115–128.
18.
ShepherdRF, StokesAA, FreakeJ, BarberJ, SnyderPW, MazzeoAD, CademartiriL, MorinSA, WhitesidesGM. Using explosions to power a soft robot. Angewandte Chemie, 2013; 125(10):2964–2968.
19.
HshiehF-Y. Shielding effects of silica-ash layer on the combustion of silicones and their possible applications on the fire retardancy of organic polymers. Fire and Materials, 1998; 22(2):69–76.
20.
HamdaniS, LonguetC, PerrinD, Lopez-cuestaJ-M, GanachaudF. Flame retardancy of silicone-based materials. Polymer Degradation and Stability, 2009; 94(4):465–495.
21.
Characteristic properties of silicone rubber compounds, Shin-Etsu Chemical Co., Tokyo, Japan, Mar2005. Available at www.silicone.jp/e/catalog/pdf/rubber_e.pdf (accessed Aug.18, 2014).
22.
NappN, ArakiB, TolleyMT, NagpalR, WoodRJ. Simple passive valves for addressable pneumatic actuation. In Robotics and Automation (ICRA), 2014IEEE International Conference on 2014.
23.
SuzumoriK, IikuraS, TanakaH. Development of flexible microactuator and its applications to robotic mechanisms. In Proceedings, 1991 IEEE International Conference on Robotics and Automation; 1622–1627.
24.
Bishop-MoserJ, KrishnanG, KimC, KotaS. Design of soft robotic actuators using fluid-filled fiber-reinforced elastomeric enclosures in parallel combinations. In 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS); 4264–4269.
25.
GallowayKC, PolygerinosP, WalshCJ, WoodRJ. Mechanically programmable bend radius for fiber-reinforced soft actuators. In 2013 16th International Conference on Advanced Robotics (ICAR); 1–6.
26.
MarcheseAD, KomorowskiK, OnalCD, RusD. Design and control of a soft and continuously deformable 2d robotic manipulation system. In Proceedings of IEEE International Conference on Robotics and Automation 2014.
27.
MajidiC, ShepherdRF, KramerRK, WhitesidesGM, WoodRJ. Influence of surface traction on soft robot undulation. The International Journal of Robotics Research, 2013; 32(13):1577–1584.
28.
MajidiC, KramerR, WoodRJ. A non-differential elastomer curvature sensor for softer-than-skin electronics. Smart Materials and Structures, 2011; 20(10):105017.
29.
ParkY-L, ChenB-R, WoodRJ. Design and fabrication of soft artificial skin using embedded microchannels and liquid conductors. Sensors Journal, IEEE, 2012; 12(8):2711–2718.
30.
VogtDM, ParkY-L, WoodRJ. Design and characterization of a soft multi-axis force sensor using embedded microfluidic channels. Sensors Journal, IEEE, 2013; 13(10):4056–4064.
31.
MengucY, ParkY-L, Martinez-VillalpandoE, AubinP, ZisookM, StirlingL, WoodRJ, WalshCJ. Soft wearable motion sensing suit for lower limb biomechanics measurements. In 2013 IEEE International Conference on Robotics and Automation (ICRA); 5309–5316.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
