The Effect of Inspiratory Resistance on Exercise Performance and Perception in Moderate Normobaric Hypoxia

Abstract

Abstract

Seo, Yongsuk, Jeremiah Vaughan, Tyler D. Quinn, Brittany Followay, Raymond Roberge, Ellen L. Glickman, and Jung-Hyun Kim. The effect of inspiratory resistance on exercise performance and perception in moderate normobaric hypoxia. High Alt Med Biol. 18:417–424, 2017.

Purpose:

Respirators are simple and efficient in protecting workers against toxic airborne substances; however, their use may limit the physical performance of workers. The purpose of this study was to determine the effect of inspiratory resistance on physical performance and breathing perception in normobaric hypoxia.

Method:

Nine healthy men wore a tight-fitting respiratory mask outfitted with one of four different inspiratory resistors (R) (0, 1.5, 4.5, 7.5 cm H₂O/L/Sec) while exercising at normobaric hypoxia (17% O₂) at submaximal exercise workloads of 50, 100, and 150 W on a cycle ergometer for 10 minutes each, followed by a maximal oxygen uptake (VO₂max) test to exhaustion.

Results:

Maximal power output at R7.5 was significantly lower than R0 (p = 0.016) and R1.5 (p = 0.035). Respiration rate was significantly reduced at R4.5 (p = 0.011) and R7.5 (p ≤ 0.001) compared with R0. Minute ventilation was significantly decreased in R7.5 compared with R0 (p = 0.003), R1.5 (p = 0.010), and R4.5 (p = 0.016), whereas VO₂ was not significantly changed. Breathing comfort (BC) and breathing effort (BE) were significantly impaired in R7.5 (BC: p = 0.025, BE: p = 0.001) and R4.5 (BC: p = 0.007, BE: p = 0.001) compared with R0, but rating of perceived exertion (RPE) remained unchanged.

Conclusions:

Added inspiratory resistance limited maximal power output and increased perceptions of BC and BE in normobaric hypoxia. However, low-to-moderate inspiratory resistance did not have a deleterious effect on VO₂ or RPE at submaximal or maximal exercise. Perceptual and physiological characteristics of respirators of varying inspiratory resistances should be considered by manufacturers and end users during design and respirator selection processes.