Abstract
Background:
The nasal septum supports the structure of the nose and is frequently manipulated during septorhinoplasty.
Objective:
To compare measurements of thickness and compressive Young's modulus (YM) between different regions of nasal septa from human anatomic specimens.
Study Design:
Case series.
Methods:
Cartilaginous septa from human anatomic specimens were dissected. Septum thickness was measured at 24 points with regular intervals using a digital caliper. Compressive YM was determined at 14 regions using a force gauge. Two-tailed student's t-tests were used to compare the average thickness and YM between different regions.
Results:
Septa from 40 human anatomic specimens were included, with age ranging from 50 to 89. Fifty percent of specimens were female. The mean (standard deviation) thickness of the septum was 1.75 (0.76) mm. The mean YM was 2.38 (1.29) MPa. The septum was thickest near the maxillary crest (3.09 [1.17] mm) and the keystone area (2.52 [0.91] mm) and thinnest near the anterior septal angle (1.29 [0.58] mm). The septum was most stiff posteriorly (2.90 [1.32] MPa) and least stiff anteriorly (1.80 [1.15] MPa).
Conclusion:
The nasal septum is thickest posteriorly, inferiorly, and along its bony edges. The septum is stiffest posteriorly, ventrally, and along its bony edges.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
