Abstract
Background:
The use of virtual noses to predict the outcome of surgery is of increasing interests, particularly, as detailed and objective pre- and postoperative assessments of nasal airway obstruction (NAO) are difficult to perform. The objective of this article is to validate predictions using virtual noses against their experimentally measured counterpart in rigid 3D-printed models.
Methods:
Virtual nose models, with and without NAO, were reconstructed from patients' cone beam computed tomography scans, and used to evaluate airflow characteristics through computational fluid dynamics simulations. Prototypes of the reconstructed models were 3D printed and instrumented experimentally for pressure measurements.
Results:
Correlation between the numerical predictions and experimental measurements was shown. Analysis of the flow field indicated that the NAO in the nasal valve increases significantly the wall pressure, shear stress, and incremental nasal resistance behind the obstruction.
Conclusions:
Airflow predictions in static virtual noses correlate well with detailed experimental measurements on 3D-printed replicas of patient airways.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
