Abstract
Background and Purpose:
Robot-assisted laparoscopic pyeloplasty has become more widely used. Intraoperative placement and confirmation of ureteral stent position can be cumbersome with the robotic arms in place. We present a technique of percutaneous antegrade stent placement that is reliable with minimal morbidity.
Patients and Methods:
A retrospective cohort study was performed. Patient demographics, radiographic imaging, intraoperative details, and surgical outcomes were abstracted from the medical record. A 14-gauge angiocatheter was placed through the abdominal wall. A ureteral stent was guided over a wire down the dismembered ureter. Stent position was confirmed by retrograde reflux of methylene blue. A urethral catheter was left in place for 12 to 36 hours.
Results:
Twenty-nine patients (15 male, 14 female) were identified. Average age was 10 years. Average follow-up was 14 months. Fifteen left- and 14 right-sided procedures were performed. Two patients needed retrograde stent placement. Mean time to correctly position the stent was less than 5 minutes. Postoperatively, one patient had a urine leak managed by an indwelling urethral catheter and did not need percutaneous drainage. All stents were removed approximately 4 to 6 weeks postoperatively. One patient had retrograde migration of the stent managed by ureteroscopy at the time of stent retrieval.
Conclusions:
Antegrade ureteral stent placement through a percutaneous angiocatheter, during robot-assisted laparoscopic pyeloplasty, is a rapid and effective technique. Intraoperative confirmation of stent position can be obtained, using methylene blue bladder distention, without repositioning the patient or undocking the surgical robot.
Get full access to this article
View all access options for this article.