Abstract
In order to remove hazardous cationic dyes such as malachite green (MG) in an environmentally compatible, efficient, and cost-effective manner, this study used hydrolysis of titanium tetra-isopropoxide to create photooxidizer nanocrystalline titanium dioxide (TiO2) nanoparticles of both the rutile and anatase phases. The catalysts were characterized by N2 adsorption (Brunauer–Emmett–Teller), Fourier-transform infrared absorption spectrophotometer, X-ray diffraction, point of zero charge, UV–vis diffuse reflectance spectra, and scanning electron microscopy examination. Additionally, the photocatalytic activity of the synthesized catalyst was performed by examining the various experimental parameters such as initial MG concentration (30–60 ppm), catalyst dosage (0.2–0.35 g), irradiation time (0–60 min), and pH (4–10) under 8 W UV-218 nm irradiation for 1 h in an aqueous medium. Also, the Mere/interactive effects of benzaldehyde and NaCl salt (0–120 g/L) concentration were interpreted during degradation. The obtained results showed that the removal of MG for anatase and rutile was 97% and 57% in 1 h, respectively. When 1 g/L TiO2 was added to solution mixtures containing 50 mg/L of MG, 98% of the MG was removed. The percentage of MG dye removal enhanced with an increase in pH, duration of radiation exposure, and anatase dosage. However, photocatalytic removal rate decreased with increasing initial MG concentration. In addition, increasing the salt concentration of the medium diminished the MG degradation. Presence of benzaldehyde also decreased the MG removal which indicated that one of the products was benzaldehyde. The adsorption equilibrium constant and the rate constant were recorded as 1.05 L/mg and 2.7 ppm/min, respectively, according to the Langmuir–Hinshelwood kinetic model.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
