Restricted accessResearch articleFirst published online 2019-04
Changes in Adsorption Behavior of Perfluorooctanoic Acid and Perfluorohexanesulfonic Acid Through Chemically-Facilitated Surface Modification of Granular Activated Carbon
Activated carbon is a versatile sorbent and effective contaminant removal media due to its complex porous structure and high surface area. The main purpose of this research is to increase the uptake of perfluoroalkyl and polyfluoroalkyl substances (PFAS) through modifications of granular activated carbon (GAC) by chemical treatment. To increase the adsorption of perfluorooctanoic acid (PFOA) and perfluorohexanesulfonic acid (PFHxS) onto GAC, the surface characteristics of two types of GAC from Calgon Carbon Corporation (charcoal-based Filtrasorb-F400 and coconut-based OLC 12 × 30—CBC) were chemically modified. Two GAC were treated with acid (hydrochloric acid [HCl]), base (sodium hydroxide [NaOH]), heat activated persulfate (PS), and hydrogen peroxide catalyzed with iron (H2O2/Fe). The extent of adsorption after 2-, 5-, and 10-day reaction time and the changes in carbon surface physical and chemical characteristics of treated GAC were compared with untreated GAC. Several characterization techniques, including Brunauer–Emmett–Teller surface area, pH of point zero charge, scanning electron microscopy with elemental analysis, and Fourier transform infrared spectroscopy, were used to analyze treated and untreated GAC. The extent of adsorption of both PFHxS and PFOA increased (7–8% in F400 and 6–9% in CBC) with HCl treatment likely due to increase in positive charge density, had no significant change with NaOH treatment, and decreased with PS (22–25% in F400 and 27–35% in CBC) and H2O2/Fe (4–8% in F400 and 12–13% in CBC) treatment. All the treated GAC had lower BET surface area compared to untreated GAC which is the main physical property deemed responsible for decreased adsorption. It was found that surface oxygen functional groups increased with treatments and decreased the hydrophobicity of the GAC surface, which resulted in lower PFAS adsorption.
Get full access to this article
View all access options for this article.
References
1.
Agency, U.S.E.P. (2016). Drinking Water Health Advisory for Perfluorooctanoic Acid (PFOA). May, 1. Washington, DC: U.S. Environmental Protection Agency.
2.
Arias EspanaV.A., MallavarapuM., and NaiduR. (2015). Treatment technologies for aqueous perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA): A critical review with an emphasis on field testing. Environ. Technol. Innov. 4, 168.
3.
ArvanitiO.S., HwangY., AndersenH.R., StasinakisA.S., ThomaidisN.S., and AloupiM. (2015). Reductive degradation of perfluorinated compounds in water using Mg-aminoclay coated nanoscale zero valent iron. Chem. Eng. J. 262, 133.
4.
BabelS., and KurniawanT.A. (2004). Cr (VI) removal from synthetic wastewater using coconut shell charcoal and commercial activated carbon modified with oxidizing agents and/or chitosan. Chemosphere, 54, 951.
5.
BackeW.J., DayT.C., and FieldJ.A. (2013). Zwitterionic, cationic, and anionic fluorinated chemicals in aqueous film forming foam formulations and groundwater from US military bases by nonaqueous large-volume injection HPLC-MS/MS. Environ. Sci. Technol. 47, 5226.
6.
BrookeD., FootittA., and NwaoguT.A. (2004). Environmental Risk Evaluation Report: Perfluorooctanesulphonate (PFOS). United Kingdom: Environment Agency.
7.
CarterK.E., and FarrellJ. (2010). Removal of perfluorooctane and perfluorobutane sulfonate from water via carbon adsorption and ion exchange. Sep. Sci. Technol. 45, 762.
8.
ChiangH.-L., HuangC.P., and ChiangP.C. (2002). The surface characteristics of activated carbon as affected by ozone and alkaline treatment. Chemosphere, 47, 257.
CrimminsB.S., XiaX., HopkeP.K., and HolsenT.M. (2014). A targeted/non-targeted screening method for perfluoroalkyl carboxylic acids and sulfonates in whole fish using quadrupole time-of-flight mass spectrometry and MSe. Anal. Bioanal. Chem. 406, 1471.
11.
DengS., ZhangQ., NieY., WeiH., WangB., HuangJ., YuG., and XingB. (2012). Sorption mechanisms of perfluorinated compounds on carbon nanotubes. Environ. Pollut. 168, 138.
12.
DuZ., DengS., BeiY., HuangQ., WangB., HuangJ., and YuG. (2014). Adsorption behavior and mechanism of perfluorinated compounds on various adsorbents—A review. J. Hazard. Mater. 274, 443.
13.
EschauzierC., BeerendonkE., Scholte-VeenendaalP., and De VoogtP. (2012). Impact of treatment processes on the removal of perfluoroalkyl acids from the drinking water production chain. Environ. Sci. Technol. 46, 1708.
14.
GoelJ., KadirveluK., RajagopalC., and Kumar GargV. (2005). Removal of lead(II) by adsorption using treated granular activated carbon: Batch and column studies. J. Hazard. Mater. 125, 211.
15.
HigginsC.P., and LuthyR.G. (2006). Sorption of perfluorinated surfactants on sediment. Environ. Sci. Technol. 40, 7251.
16.
HulingS.G., JonesP.K., ElaW.P., and ArnoldR.G. (2005). Fenton-driven chemical regeneration of MTBE-spent GAC. Water Res. 39, 2145.
17.
HulingS.G., JonesP.K., and LeeT.R. (2007). Iron optimization for Fenton-driven oxidation of MTBE-spent granular activated carbon. Environ. Sci. Technol. 41, 4090.
18.
HulingS.G., KanE., and WingoC. (2009). Fenton-driven regeneration of MTBE-spent granular activated carbon—Effects of particle size and iron amendment procedures. Appl. Catal. B, 89, 651.
19.
HutsonA., KoS., and HulingS.G. (2012). Persulfate oxidation regeneration of granular activated carbon: Reversible impacts on sorption behavior. Chemosphere, 89, 1218.
20.
JenniferA. (2003). Occurrence and persistence of perfluorooctanesulfonate and other perfluorinated surfactants in groundwater at a fire-training area at Wurtsmith Air Force Base, Michigan, USA. J. Environ. Monit. 5, 341.
21.
JohnsonR.L., AnschutzA.J., SmolenJ.M., SimcikM.F., and PennR.L. (2007). The adsorption of perfluorooctane sulfonate onto sand, clay, and iron oxide surfaces. J. Chem. Eng. Data, 52, 1165.
22.
JulienF., BauduM., and MazetM. (1998). Relationship between chemical and physical surface properties of activated carbon. Water Res. 32, 3414.
23.
KanE., and HulingS.G. (2009). Effects of temperature and acidic pre-treatment on Fenton-driven oxidation of MTBE-spent granular activated carbon. Environ. Sci. Technol. 43, 1493.
24.
KaranfilT., and KilduffJ.E. (1999). Role of granular activated carbon surface chemistry on the adsorption of organic compounds. 1. Priority pollutants. Environ. Sci. Technol. 33, 3217.
25.
LiL., LiuS., LiuJ. (2011). Surface modification of coconut shell based activated carbon for the improvement of hydrophobic VOC removal. J. Hazard. Mater. 192, 683.
26.
MarshH., and Rodrigues-ReinosoF. (2006). Activated Carbon. London: Endeavour.
27.
MartinJ.W., EllisD.A., MaburyS.A., HurleyM.D., and WallingtonT.J. (2006). Atmospheric chemistry of perfluoroalkanesulfonamides: Kinetic and product studies of the OH radical and Cl atom initiated oxidation of N-ethyl perfluorobutanesulfonamide. Environ. Sci. Technol. 40, 864.
28.
MerinoN., QuY., DeebR.A., HawleyE.L., HoffmannM.R., and MahendraS. (2016). Degradation and removal methods for perfluoroalkyl and polyfluoroalkyl substances in water. Environ. Eng. Sci. 33, 615.
29.
Moreno-castillaC., Carrasco-marínF., Maldonado-hódarF.J., and Rivera-utrillaJ. (1998). Effects of non-oxidant and oxidant acid treatments on the surface properties of an activated carbon with very low ash content. Carbon, 36, 145.
30.
Moreno-CastillaC., López-RamónM., and Carrasco-MarínF. (2000). Changes in surface chemistry of activated carbons by wet oxidation. Carbon, 38, 1995.
31.
Ochoa-HerreraV., and Sierra-AlvarezR. (2008). Removal of perfluorinated surfactants by sorption onto granular activated carbon, zeolite and sludge. Chemosphere, 72, 1588.
32.
ParkS.-J., and JangY.-S. (2002). Pore structure and surface properties of chemically modified activated carbons for adsorption mechanism and rate of Cr(VI). J. Colloid Interface Sci. 249, 458.
33.
PradhanB.K., and SandleN.K. (1999). Effect of different oxidizing agent treatments on the surface properties of activated carbons. Carbon, 37, 1323.
34.
RakA., and VogelC.M. (2009). Increasing Regulation of Perfluorinated Compounds and the Potential Impacts at Air Force Installations, Prepared for the U.S. Air Force. March.
35.
Roque-MalherbeR.M.A. (2010). The Physical Chemistry of Materials: Energy and Environmental Applications. Florida: Taylor and Francis Group, LLC.
SchultzM.M., BarofskyD.F., and FieldJ.A. (2004). Quantitative determination of fluorotelomer sulfonates in groundwater by LC MS/MS. Environ. Sci. Technol. 38, 1828.
38.
SenevirathnaS.T., TanakaS., FujiiS., KunachevaC., HaradaH., AriyadasaB., and ShivakotiB.R. (2010a). Adsorption of perfluorooctane sulfonate (n-PFOS) onto non ion-exchange polymers and granular activated carbon: Batch and column test. Desalination, 260, 29.
39.
SenevirathnaS.T., TanakaS., FujiiS., KunachevaC., HaradaH., ShivakotiB.R., and OkamotoR. (2010b). A comparative study of adsorption of perfluorooctane sulfonate (PFOS) onto granular activated carbon, ion-exchange polymers and non-ion-exchange polymers. Chemosphere, 80, 647.
40.
ShrivastavaA., and GuptaV.B. (2011). Methods for the determination of limit of detection and limit of quantitation of the analytical methodsNo Title. Chron. Young Sci. 2, 21.
41.
SiriwardenaD.P. (2017). A Treatment Approach for Remediation of Per/polyfluoroalkyl Substances Contaminated Groundwater Using Granular Activated Carbon: A Thesis. Doctoral dissertation, Clarkson University.
42.
StockN.L., LauF.K., EllisD.A., MartinJ.W., MuirD.C.G., and MaburyS.A. (2004). Polyfluorinated telomer alcohols and sulfonamides in the North American troposphere. Environ. Sci. Technol. 38, 991.
43.
TakagiS., AdachiF., MiyanoK., KoizumiY., TanakaH., WatanabeI., TanabeS., and KannanK. (2011). Fate of perfluorooctanesulfonate and perfluorooctanoate in drinking water treatment processes. Water Res. 45, 3925.
44.
TangC.Y., Shiang FuQ., GaoD., CriddleC.S., and LeckieJ.O. (2010). Effect of solution chemistry on the adsorption of perfluorooctane sulfonate onto mineral surfaces. Water Res. 44, 2654.
45.
WangF., LiuC., and ShihK. (2012). Adsorption behavior of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) on boehmite. Chemosphere, 89, 1009.
46.
YinC.Y., ArouaM.K., and DaudW.M.A.W. (2007). Review of modifications of activated carbon for enhancing contaminant uptakes from aqueous solutions. Sep. Purif. Technol. 52, 403.
47.
YuQ., ZhangR., DengS., HuangJ., and YuG. (2009). Sorption of perfluorooctane sulfonate and perfluorooctanoate on activated carbons and resin: Kinetic and isotherm study. Water Res. 43, 1150.
48.
ZhangQ., DengS., YuG., and HuangJ. (2011). Removal of perfluorooctane sulfonate from aqueous solution by crosslinked chitosan beads: Sorption kinetics and uptake mechanism. Bioresour. Technol. 102, 2265.
49.
ZhiY., and LiuJ. (2015). Adsorption of perfluoroalkyl acids by carbonaceous adsorbents: Effect of carbon surface chemistry. Environ. Pollut. 202, 168.
50.
ZhiY., and LiuJ. (2016). Surface modification of activated carbon for enhanced adsorption of perfluoroalkyl acids from aqueous solutions. Chemosphere, 144, 1224.
51.
ZhongH., BrusseauM.L., WangY., YanN., QuigL., and JohnsonG.R. (2015). In-situ activation of persulfate by iron filings and degradation of 1,4-dioxane. Water Res. 83, 104.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
