Abstract
Abstract
Reconstructed human epidermis mimics the architecture of human epidermis, and can thus be used as an alternative to animal models in cosmetic industry, toxicology, and dermatological research. An essential quality criterion of these in vitro models is a high barrier function that is assessed by applying detergents in different concentrations or for different timeframes to the surface of the models to derive IC-50 or ET-50 values. Being a complex procedure, these assays are currently conducted manually, requiring significant employment of labor, and lead to increased variability between different tests. Here, we show that ET-50 testing can be automated by using a dual-arm robotic system. The advantage of this robotic system is that it allows high flexibility in lab automation because of its capability to use standard laboratory equipment. To compare manual and automated testing, both processes were performed in parallel. An ET-50 value of 5.58 hours was obtained from manual testing. In comparison, ET-50 value of automated assessment was determined as 5.29 hours. This clearly demonstrates that both assays resulted in concordant ET-50 values for the employed reconstructed epidermis, and thus transfer of the manual protocol to automated testing was successful.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
