This study describes a 3D fused deposition modeling (FDM) printing process using a graphene-impregnated polylactic acid (G-PLA) filament to create a new type of rigid, plastic, nonconductive, and anticorrosion layer. Therefore, the possibility of 3D printing a plastic layer using FDM methods is demonstrated herein. A commercial magnet such as N35 NdFeB can be used to produce an efficient shielding film by additive manufacturing. As the coating layer thickness increases, the remanence decreases from 1.17 to 1.01 T for the G-PLA coating. Visual tests were performed after exposure to all aqueous NaCl test solutions (0.5 and 1 M), and no evidence of corrosion of the coating was obtained.
Get full access to this article
View all access options for this article.
References
1.
BilgiliM, YasarA, SimsekE. Offshore wind power development in Europe and its comparison with onshore counterpart. Renew Sustain Energy Rev, 2011; 15(2):905–915; doi: 10.1016/j.rser.2010.11.006
2.
El-MoneimA, GebertA. Electrochemical characterization of galvanically coupled single phases and nanocrystalline NdFeB-based magnets in NaCl solutions. J Appl Electrochem, 2003; 33:795–805; doi: 10.1023/A:1025548411091
3.
ZhangP, MaT, LiangL, et al.Improvement of corrosion resistance of Cu and Nb co-added NdFeB sintered magnets. Mater Chem Phys, 2014; 147(3):982–986; doi: 10.1016/j.matchemphys.2014.06.046
4.
YuL, WenY, YanY. Effects of Dy and Nb on the magnetic properties and corrosion resistance of sintered NdFeB. J Magn Magn Mater, 2004; 283(2–3):353–356; doi: 10.1016/j.jmmm.2004.06.006
5.
YangX, LiQ, ZhangS, et al.Electrochemical corrosion behaviors and protective properties of Ni–Co–TiO2 composite coating prepared on sintered NdFeB magnet. Mater Corros, 2010; 61(7):618–625; doi: 10.1002/maco.200905449
6.
HuangY, LiH, ZuoM, et al.Corrosion resistance of sintered NdFeB coated with SiC/Al bilayer thin films by magnetron sputtering. J Magn Magn Mater, 2016; 409:39–40; doi: 10.1016/j.jmmm.2016.02.006
7.
ChenE, PengK, YangW, et al.Effects of Al coating on corrosion resistance of sintered NdFeB magnet. Trans Nonferrous Met Soc China, 2014; 24(9):2864–2869; doi: 10.1016/S1003-6326(14)63419-1
8.
ZhangK, WangZ, HeJ, et al.Coupling effects of hydrogen and Dy/Nb on magnetic properties of sintered NdFeB magnets. Int J Hydrogen Energy, 2022; 47(30):14027–14038; doi: 10.1016/j.ijhydene.2022.02.154
9.
MaoS, YangH, SongZ, et al.Corrosion behaviour of sintered NdFeB deposited with an aluminum coating. Corros Sci, 2011; 53(5):1887–1894; doi: 10.1016/j.corsci.2011.02.006
10.
RadaM, GebertA, MaziluI, et al.Corrosion studies on highly textured Nd–Fe–B sintered magnets. J Alloys Compd, 2006; 415(1–2):111–120; doi: 10.1016/j.jallcom.2005.07.063
11.
KimT, LeeS, KimH, et al.Simultaneous application of Dy–X (X = F or H) powder doping and dip-coating processes to Nd–Fe–B sintered magnets. Acta Mater, 2015; 93:95–104; doi: 10.1016/j.actamat.2015.04.019
12.
IsotahdonE.Corrosion Losses, Mechanisms and Protection Strategies for Sintered Nd-Fe-B Magnets. The Tampere University of Technology. Publication: Finland; 2017.
13.
DrakM, DobrzańskiLA. Corrosion of Nd-Fe-B permanent magnets. J Achiev Mater Manuf Eng, 2007; 20(1–2):239–242.
14.
KappelW, CodescuMM, StancuN, et al.Evaluation of the corrosion behavior for the permanent magnets based on rare earth, used in aeronautical industry. J Optoelectronics Adv Mater, 2006; 8(2):523–525.
15.
ZhouQ, LiuaZW, ZhongXC, et al.Properties improvement and structural optimization of sintered NdFeB magnets by non-rare earth compound grain boundary diffusion. Mater Des, 2015; 86:114–120; doi: 10.1016/j.matdes.2015.07.067
16.
WangH, LiA, LiW. Effect of Pr and Dy substitution on the impact resistance of sintered NdFeB magnets. Intermetallics, 2006; 15(7):985–988; doi: 10.1016/j.intermet.2006.11.001
17.
SchultzL, El-AzizAM, BarkleitG, et al.Corrosion behavior of Nd–Fe–B permanent magnetic alloys. Mater Sci Eng A, 1999; 267(2):307–313; doi: 10.1016/S0921-5093(99)00107-0
18.
RazaMA, RehmanZU, GhauriFA, et al.Corrosion study of electrophoretically deposited graphene oxide coatings on copper metal. Thin Solid Films, 2016; 620:150–159; doi: 10.1016/j.tsf.2016.09.036
19.
OliveiraMCL, AntunesRA. Graphene-based coatings for magnesium alloys: Exploring the correlation between coating architecture, deposition methods, corrosion resistance and materials selection. Corros Rev, 2022; 40(5):427–451; doi: 10.1515/corrrev-2022-0004
20.
KiranNU, DeyS, SinghBP, et al.Graphene coating on copper by electrophoretic deposition for corrosion prevention. Coatings, 2017; 7(12):214; doi: 10.3390/coatings7120214
21.
HeW, ZhuL, ChenH, et al.Electrophoretic deposition of graphene oxide as a corrosion inhibitor for sintered NdFeB, Appl Surf Sci, 2013; 279:416–423; doi: 10.1016/j.apsusc.2013.04.130
22.
TongY, BohmS, SongM. Graphene based materials and their composites as coatings. Austin J Nanomed Nanotechnol, 2014; 1(1):1003.
23.
RazaMA, AhmadA, GhauriFA, et al.Graphene oxide coating for improved corrosion resistance of NdFeB. NUST J Eng Sci, 2017; 10(1):14–18; doi: 10.24949/njes.v10i1.200
24.
MondalJ, MarandiM, KozlovaJ, et al.Protection and functionalizing of stainless steel surface by graphene oxide-polypyrrole composite coating. J Chem Chem Eng, 2014; 8:786–793.
25.
XieY, ChenM, XieD, et al.A fast, low temperature zinc phosphate coating on steel accelerated by graphene oxide. Corros Sci, 2017; 128:1–8; doi: 10.1016/j.corsci.2017.08.033
26.
GuoN, LeuMC. Additive manufacturing: Technology, applications, and research needs. Front Mech Eng, 2013; 8:1–29; doi: 10.1007/s11465-013-0248-8
27.
NgoTD, KashaniA, ImbalzanoG, et al.Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos B Eng, 2018; 143:172–196; doi: 10.1016/j.compositesb.2018.02.012
28.
BustillosJ, MonteroD, NautiyalP, et al.Integration of graphene in poly (lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites. Polym Compos, 2018; 39(11):3877–3888; doi: 10.1002/pc.24422
29.
RaraniMH, AfaraniMR, ZahediAM. Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites. Compos B Eng, 2019; 175:107147; doi: 10.1016/j.compositesb.2019.107147
30.
CamineroMA, ChacónJM, PlazaEG, et al.Additive manufacturing of PLA-based composites using fused filament fabrication: Effect of graphene nanoplatelet reinforcement on mechanical properties, dimensional accuracy and texture. Polymers, 2019; 11(5):799; doi: doi.org/10.3390/polym11050799
31.
MittalG, DhandV, RheeKY, et al.A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposies. J Ind Eng Chem, 2015; 21:11–25; doi: 10.1016/j.jiec.2014.03.022
32.
VidakisN, PetousisM, SavvakisK, et al.A comprehensive investigation of the mechanical behavior and the dielectrics of pure polylactic acid (PLA) and PLA with graphene (GnP) in fused deposition modeling (FDM). Int J Plast Technol, 2019; 23:195–206.; doi: 10.1007/s12588-019-09248-1
33.
CamargoJC, MachadoAR, AlmeidaEC, et al.Mechanical properties of PLA-graphene filament for FDM 3D printing. Int J Adv Manuf Technol, 2019; 103:2423–2443; doi: 10.1007/s00170-019-03532-5
MooreM, SueptitzR, GebertA, et al.Impact of magnetization state on the corrosion of sintered Nd–Fe–B magnets for e-motor applications. Mater Corros, 2014; 65(9):891–896; doi: 10.1002/maco.201206978
36.
AngLY, OthmanNK, JalarA, et al.The effect of magnetic field on copper in various corrosive medium. AIP Conf Proc, 2014; 1614(1):26–29; doi: 10.1063/1.4895164
37.
ParapurathS, RavikumarA, VahdatiN, et al.Effect of magnetic field on the corrosion of API-5L-X65 steel using electrochemical methods in a flow loop. Appl Sci, 2021; 11(19):9329; doi: 10.3390/app11199329
38.
MitreCIN, TosinG, ColnagoLA. In-operando analysis of the corrosion patterns and rates under magnetic fields using metallic film. NPJ Mater Degrad, 2022; 6:24; doi: 10.1038/s41529-022-00233-5
39.
ZhangY, WangY, ZhaoS, et al.Effect of magnetic field on the corrosion behaviour of carbon steel in static seawater. Int J Electrochem Sci, 2019; 14:11279–11288; doi: 10.20964/2019.12.14
40.
Nasher LSH, Shalash LABT; Study the effect of magnetic field on the corrosion of steel in sodium chloride solution (NaCl). Misan J Acad Stud, 2010; 9(17):30–38
41.
CostaI, OliveiraMCL, MeloHG, FariaRN; The effect of the magnetic field on the corrosion behavior of Nd–Fe–B permanent magnets. J Magn Magn Mater, 2004; 278(3):348–358; doi: 10.1016/j.jmmm.2003.12.1320
42.
BavendiekG, MüllerF, SteentjesS, et al.Modeling of history-dependent magnetization in the finite element method on the example of a postassembly rotor magnetizer. Int J Numer Model, 2020; 33:e2674; doi: 10.1002/jnm.2674
43.
Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs.
44.
IsotahdonE, Huttunen-SaarivirtaE, Kuokkala VT; Development of magnetic losses during accelerated corrosion tests for Nd-Fe-B magnets used in permanent magnet generators. Corrosion, 2016; 72(6):732–741; doi: 10.5006/2037
45.
ZhangK, FanE, HeJ, et al.Long-term effects of electrochemical corrosion on magnetic properties of sintered NdFeB magnets. J Magn Magn Mater, 2021; 538:168309; doi: 10.1016/j.jmmm.2021.168309
IsotahdonE, Huttunen-SaarivirtaE, KuokkalaVT, et al.Corrosion losses in sintered (Nd, Dy)–Fe–B magnets for different geometries. IEEE Magnet Lett, 2016; 7:1–4; doi: 10.1109/LMAG.2015.2501404
48.
NiJ, MaT, YanM; Improvement of corrosion resistance in Nd–Fe–B magnets through grain boundaries restructuring. Mater Lett, 2012; 75:1–3; doi: 10.1016/j.matlet.2012.01.100
