Boron-based aids are commonly introduced to tackle the unsatisfactory densification of SS316L parts fabricated by binder jetting (BJ) technology. However, there is scarce study on the effect of sintering aids on the mechanical performance. This work investigates the effect of B4C aids and sintering temperature on the mechanical performance and microscopic morphology of BJ printing SS316L parts. SS316L powders with a bimodal size distribution were adopted to enhance density and reduce the shape distortion. Besides, B4C was added as a sintering aid to promote densification during sintering. The results show that the bimodal powder is in favour of the density increase and the sintering process. The sintering temperature is largely reduced with the addition of B4C. Further, the mechanical performance is mainly affected by the final density and B4C content. In view of a comprehensive evaluation of shape retention and properties, B4C content of 1 wt.% and sintering temperature of 1250°C are expected to be the optimal parameters.
Get full access to this article
View all access options for this article.
References
1.
FrazierWE. Metal additive manufacturing: A review. J Mater Eng Perform, 2014; 23(6):1917–1928; doi: 10.1007/s11665-014-0958-z
2.
YuT, LiM, BreauxA, et al.Experimental and numerical study on residual stress and geometric distortion in powder bed fusion process. J Manuf Process, 2019; 46:214–224; doi: 10.1016/j.jmapro.2019.09.010
3.
MostafaeiA, ElliottAM, BarnesJE, et al.Binder jet 3D printing? Process parameters, materials, properties, modeling, and challenges. Prog Mater Sci, 2021; 119; doi: 10.1016/j.pmatsci.2020.100707
4.
MirzababaeiS, PasebaniS. A review on binder jet additive manufacturing of 316L stainless steel. J Manuf Mater Process, 2019; 3(3); doi: 10.3390/jmmp3030082
5.
MostafaeiA, StevensEL, FerenceJJ, et al.Binder jetting of a complex-shaped metal partial denture framework. Addit Manuf, 2018; 21:63–68; doi: 10.1016/j.addma.2018.02.014
6.
TrombettaR, InzanaJA, SchwarzEM, et al.3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery. Ann Biomed Eng, 2017; 45(1):23–44; doi: 10.1007/s10439-016-1678-3
7.
HuangX, BauderT, DoT, et al.A binder jet printed, stainless steel preconcentrator as an in-line injector of volatile organic compounds. Sensors (Basel), 2019; 19(12); doi: 10.3390/s19122748
8.
BarthelB, JanasF, WielandS. Powder condition and spreading parameter impact on green and sintered density in metal binder jetting. Powder Metall, 2021; 64(5):378–386; doi: 10.1080/00325899.2021.1912923
9.
BatmazR, ZardoshtianA, SabistonTD, et al.An investigation into sinterability improvements of 316L binder jet printed parts. Metall Mater Trans A, 2022; 53(3):915–926; doi: 10.1007/s11661-021-06564-3
10.
LecisN, MarianiM, BeltramiR, et al.Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting. Mater Sci Eng A, 2021; 828; doi: 10.1016/j.msea.2021.142108
11.
ChenZ, LiF, ChenW, et al.Numerical simulation of particle size influence on the sintering behavior of 316L stainless steel powders fabricated by binder jet 3D printing. J Mater Eng Perform, 2021; 30(5):3705–3717; doi: 10.1007/s11665-021-05709-0
12.
DoT, BauderTJ, SuenH, et al.Additively manufactured full-density stainless steel 316L with binder Jet printing. Proceedings of the ASME 2018 International Manufacturing Science and Engineering Conference. College Station, TX; 2018.
13.
SohnHY, MorelandC. The effect of particle size distribution on packing density. Can J Chem Eng, 1968; 46(3):162–167.
14.
ZiaeeM, TridasEM, CraneNB. Binder-jet printing of fine stainless steel powder with varied final density. JOM, 2016; 69:1–5.
15.
LeeY, NandwanaP, SimunovicS. Powder spreading, densification, and part deformation in binder jetting additive manufacturing. Prog Addit Manuf, 2022; 7(1):111–125; doi: 10.1007/s40964-021-00214-1
16.
GermanRM.Powder Metallurgy and Particulate Materials Processing: The Processes, Materials, Products, Properties and Applications. Metal Powder Industries Federation; 2005.
17.
VerleeB, DormalT, Lecomte-BeckersJ. Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing. Powder Metall, 2013; 55(4):260–267; doi: 10.1179/0032589912z.00000000082
ZovasPE, GermanRM, HwangKS, et al.Activated and liquid-phase sintering—Progress and problems. JOM, 1983; 35(1):28–33; doi: 10.1007/BF03338181
20.
EremenkoVN, NaĭdychIUrV, LavrinenkoIA. Liquid-Phase Sintering. Springer; New York, Consultants Bureau; 1970.
21.
DoT, KwonP, ShinCS. Process development toward full-density stainless steel parts with binder jetting printing. Int J Mach Tools Manuf, 2017; 121:50–60; doi: 10.1016/j.ijmachtools.2017.04.006
ZagoM, LecisNFM, VedaniM, et al.Dimensional and geometrical precision of parts produced by binder jetting process as affected by the anisotropic shrinkage on sintering. Addit Manuf, 2021; 43; doi: 10.1016/j.addma.2021.102007
24.
SunC, TianX, WangL, et al.Effect of particle size gradation on the performance of glass-ceramic 3D printing process. Ceramics Int, 2017; 43(1):578–584; doi: 10.1016/j.ceramint.2016.09.197
25.
MostafaeiA, Rodriguez De VecchisP, NettleshipI, et al.Effect of powder size distribution on densification and microstructural evolution of binder-jet 3D-printed alloy 625. Mater Des, 2019; 162:375–383; doi: 10.1016/j.matdes.2018.11.051
26.
WuH, ChengY, LiuW, et al.Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography. Ceramics Int, 2016; 42(15):17290–17294; doi: 10.1016/j.ceramint.2016.08.024
27.
ShanY, ZhangZ, SunX, et al.Fast densification mechanism of bimodal powder during pressureless sintering of transparent AlON ceramics. J Eur Ceramic Soc, 2016; 36(3):671–678; doi: 10.1016/j.jeurceramsoc.2015.10.026
28.
KamadaK, NakamuraM, HorieH. Effect of boron and silicon additions on liquid-phase sintering behavior and CorrosionResisance of P/M ferrite type stainless steels. Jjpnsocpowder Powder Metall, 2009; 47(10):1091–1096.
29.
EbrahimiS, HeydariMS, BaharvandiHR, et al.Effect of iron on the wetting, sintering ability, and the physical and mechanical properties of boron carbide composites: A review. Int J Refract Metals Hard Mater, 2016; 57:78–92; doi: 10.1016/j.ijrmhm.2016.02.007
30.
BusbyPE, WargaME, WellsC. Diffusion and solubility of boron in iron and steel. JOM, 1953; 5(11):1463–1468.
31.
HallemansB, WollantsP, RoosJR. Thermodynamic reassessment and calculation of the Fe-B phase diagram. Int J Mater Res, 1994; 85(10):676–682.
32.
SerafiniFL, PeruzzoM, KrindgesI, et al.Microstructure and mechanical behavior of 316L liquid phase sintered stainless steel with boron addition. Mater Charact, 2019; 152:253–264; doi: 10.1016/j.matchar.2019.04.009
33.
WuM-W, LinZ-J, LinC-Y, et al.Mechanical properties and fracture mechanism of boron-containing 304L austenitic stainless steel densified by liquid phase sintering. Mater Sci Eng A, 2021; 814; doi: 10.1016/j.msea.2021.141182
