Abstract
In this work, open or closed air cavity (air bubble) inclusion structures are 3D printed via direct ink writing and fused deposition modeling methods utilizing materials of polydimethylsiloxane silicone or thermoplastic polyurethane, respectively, and these structures are examined for their attenuation capacity concerning ultrasonic waves in underwater environment. It is found that several factors, such as interstitial fencing layer, air cavity fraction, material interface interaction, and material property, are fundamental elements governing the overall attenuation performance. Hence, via 3D printing technique, which could conveniently manipulate structure's cavity volume fraction, such as via filament size and filament density on surface, structures with tunable attenuation could be designed. In addition, considering directions where ultrasound would encounter interfaces, that is, if the geometry could induce more interface interactions, such as triangular shape compared with simple square, it is possible to obtain immense attenuation enhancement, which does pave an additional approach for attenuation optimization via convoluted structural interface design that is exclusively tailored by additive manufacturing.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
