Abstract
This study describes the use of a new method for correcting count losses due to deadtime in the context of quantitative imaging of patients undergoing scintigraphy after a 4 GBq therapeutic injection of iodine-131. This method, based on measuring the count rate observed throughout the spectrum detected (50–750 keV), had been validated in a previous study and was applied here to 10 patients. Imaging was performed 3, 6, 8 and 10 days after injection. Whole-body images were acquired in six steps in energy-indexed list mode. Before reconstruction of the whole-body image, each step was processed to obtain an appropriate correction.
Three days after injection, corrective factors ranged between 1.01 (feet) and 1.20 (liver), and the increase in whole-body activity was estimated at around 10%. The difference between whole-body activities calculated from images corrected for deadtime and those estimated by urine collection was around 1% when urine collection was complete. Correction for count losses led to an 11% increase in whole-body cumulated activity.
These results indicate that it is possible to integrate this correction into dosimetric studies in order to allow count rate variations to be taken into account as a function of the regions imaged. Although the complexity of acquisitions in energy-indexed list mode limits the systematic use of this method, it can be simplified if corrections are made only for those steps in which the correction factor exceeds a threshold value. However, this implies a selection of the regions to be corrected. Another possibility consists in acquiring spectrometric images in several windows, which also allows correction for count losses.
Get full access to this article
View all access options for this article.