Influence of External Uniaxial Cyclic Strain on Oriented Fibroblast-Seeded Collagen Gels

Abstract

This study investigates the influence of cyclic tensile strain, applied to fully contracted fibroblast-seeded collagen constructs. The constructs were preloaded to either 2 or 10 mN. The preloaded constructs were subsequently subjected to a further 10% cyclic strain (0–10%) at 1 Hz, using a triangular waveform, or were cultured in the preloaded state. In all cases cellular viability was maintained during the conditioning period. Cell proliferation was enhanced by the application of cyclic strain within constructs preloaded to both 2 and 10 mN. Collagen synthesis was enhanced by cyclic strain within constructs preloaded at 2 mN only. The profile of matrix metalloproteinase (MMP) expression, determined by zymography, was broadly similar in constructs preloaded at 2 mN with or without the application of cyclic strain. By contrast, constructs preloaded at 10 mN and subjected to cyclic strain expressed enhanced levels of staining for latent MMP-1, latent MMP-9, and both latent and active MMP-2, when compared with the other conditioning regimens. The structural stiffness of constructs preloaded at 2 mN and subjected to cyclic strain was enhanced compared with control specimens, reflecting the increase in collagen synthesis. By contrast, the initial failure loads for cyclically strained constructs preloaded at 10 mN were reduced, potentially because of enhanced catabolic activity.