Abstract
Objective: The purpose of this research was to evaluate the influence of the Nd:YAG laser on microleakage of class V composite restorations. Background Data: There has been very little research that concerns microleakage resulting from the use of lasers and restorative materials. Materials and Methods: Thirty-six cavities were prepared and divided into three groups (n = 12) as follows: Group 1, control; Group 2, Nd:YAG laser irradiation before adhesive technique; Group 3, Nd:YAG laser irradiation after adhesive technique. Nd:YAG laser parameters were 320 µm of fiberoptics; energy/pulse of 40 mJ of energy/pulse; repetition rate of 15 Hz; power of 0.6 W; pulsed and non-contact, 1 mm from the surface; 30 sec in scanning mode; energy density was 49,76 J/cm2. Cavities were restored with microhybrid composite. After polishing, thermocycling and impermeabilization procedures were performed and specimens were submitted to a microleakage test, with complete immersion in aqueous solution of 50% silver nitrate for 8 h, in the total absence of light. After washing and drying, teeth were embedded to facilitate buccal-lingual vertical sectioning. Microleakage was revealed by light. Results: We used the Kruskal-Wallis test at a 5% level of confidence and observed no statistically significant difference among the tested groups. Conclusion: It was possible to conclude that Nd:YAG laser does not influence marginal microleakage on composite restorations, independent of the moment the laser had been used.
Get full access to this article
View all access options for this article.