Polyimide Composites from ‘Salt-Like’ Solution Precursors

Abstract

Four NASA Langley-developed polyimide matrix resins, LaRC™-IA, LaRC™-IAX, LaRC™-8515 and LaRC™-PETI-5, were produced via a ‘salt-like’ process developed by Unitika Ltd. The salt-like solutions (65% solids in NMP) were prepregged onto Hexcel IM7 carbon fibre using the NASA LaRC™ multipurpose tape machine. Process parameters were determined and composite panels fabricated. The temperature dependent volatile depletion rates, the thermal crystallization behaviour and the resin rheology were characterized. Composite moulding cycles were developed which consistently yielded well consolidated, void-free laminated parts. Composite mechanical properties such as the short beam shear strength; the longitudinal and transverse flexural strength and flexural modulus; the longitudinal compression strength and modulus; and the open hole compression strength and compression after impact strength were measured at room temperature and elevated temperatures. The processing characteristics and the composite mechanical properties of the four intermediate modulus carbon fibre/polyimide matrix composites were compared to existing data on the same polyimide resin systems and IM7 carbon fibre manufactured via poly(amide acid) solutions (30–35% solids in NMP). This work studies the effects of varying the synthetic route on the processing and mechanical properties of the polyimide composites.

Get full access to this article

View all access options for this article.

References

[1] Bell V L , Stump B L and Gager H 1976 J. Polym. Sci., Polym. Chem. Edn. 14 2275-2275

j[2] St. Clair T L and Progar D L 1975 Polym. Prepr. 16 538J-538J

[3] St. Clair A K and St. Clair T L 1981 SAMPE Q. 13 20-20

[4] Maudgal S and St. Clair T L 1981 SAMPE Q. 13 20-20

[5] Progar D J , St. Clair T L and Pratt J R 1989 Polyimides: Materials, Chemistry and Characterization ed C Feger et al (New York: Elsevier) p 151-151

[6] St. Clair T L , Pratt J R , Stoakley D M and Burks H D 1989 Polyimides: Materials, Chemistry and Characterization ed C Feger et al (New York: Elsevier) p 243-243

[7] Burks H D and St. Clair T L 1987 SAMPE Q. 19 1-1

[8] Johnston N J , St. Clair T L , Baucom R M and Towell T W 1989 Sci. Adv. Mater. Process Eng. 34 976-976

[9] Hou T H , Siochi E J , Johnston N J and St. Clair T L 1994

IM7/LARCTM-ITPI polyimide composites

Polymer 35 4956–4969

10.

[10] Hou T H , Johnston N J and St. Clair T L 1995

IM7/LARCTM-IA polyimide composites

High Perform. Polym. 7 105–124

11.

[11] Hou T H , Johnston N J , Weiser E S and Marchello J M 1995

Processing and properties of IM7 composites made from LARCTM-IAX polyimide powders

Soc. Adv. Matl. Proc. Eng. Series 27 135-135

12.

[12] Hou T H , Chang A C , Johnston N J and St. Clair T L 1996

Processing and properties of IM7/LARCTM-IAX-2 polyimide composites

J. Adv. Mater. 27 11–18

13.

[13] Hou T H and St. Clair T L 1998 High Perform. Polym. 10 193-193

14.

[14] Jensen B J US Patent 5866676

15.

[15] Bryant R G , Jensen B J and Hergenrother P M 1993 Polym. Prepr. 34 566-566

16.

[16] Hou T H , Jensen B J and Hergenrother P M 1995

Processing and properties of IM7/PETI composites

J. Comp. Matl. 30 109–122

17.

[17] Kaneshiro H, Eguchi J, Echigo Y and Ono T 2000 Polyimide precursor solution, coating film obtained therefrom, and process for producing polyimide coating film US Patent 6133407, October 17, 2000

18.

[18] Wilkinson S P , Marchello J M , Dixon D and Johnston N J 1993

A new NASA LaRC multi-purpose prepregging unit

Sci. Adv. Matl. Proc. Eng. Ser. 38 1-1

19.

[19] Cano R J , Johnston N J and Marchello J M 1995

Solution prepreg quality control

Soc. Adv. Matl. Proc. Eng. Series 40 583-583

20.

[20] Cano R J , Rommel M , Hinkley J A and Estes E D 1996

Fiber study involving a polyimide matrix

Soc. Adv. Matl. Proc. Eng. Series 41 1047-1047

21.

[21] Rommel M 1994 Private communication, Northrop Grumman Corp.

22.

[22] Jensen B J , Hou T H and Wilkinson S P 1995

Adhesive and composite properties of LARCTM-8515 polyimide

High Perform. Polym. 7 11–21

23.

[23] Carlsson L A and Pipes R B (eds) 1991 Composite Materials Series, Thermoplastic Composite Materials vol 7 (New York: Elsevier) p 47-47