The generation of electronic waste generation has led to significant attention towards metal recovery from urban sources. Due to scarcity, finite resources, and geopolitical constraints, tantalum recycling from capacitors is essential. In this study, sequential separation involving the removal of tightly bound epoxy resin and metallic impurities is carried out. Pyrolysis as a pre-treatment and its response on phase transformation, resin decomposition and metal enrichment are investigated. Pyrolysis effectively liberates the tantalum–rich sintered core from outer resin which is followed by mild organic acid leaching. The manganese impurity was removed from the core to obtain Ta recovery of ∼94.8% with ∼96% purity in the leach residue. The separated resin component was subjected to conventional sink-float separation for the recovery of metallic values (silver, tantalum). It is found that 100 g (666 units) of Ta capacitors can yield 34 g of Ta, equivalent to 0.28 tons of primary ore.
AgrawalM, SinghR, RanitovićM, KamberovicZ, EkbergC, SinghKK.2021. Global market trends of tantalum and recycling methods from waste tantalum capacitors: a review. Sustain Mater Technol. 29:e00323.
2.
AndersonS.2015. Conflict minerals from the Democratic Republic of the Congo — tin processing plants, a critical part of the tin supply chain. U.S. Geological Survey, Fact sheet, July 2015, p. 1–4.
3.
ChenWS, HoHJ, LinKY.2019. Hydrometallurgical process for tantalum recovery from epoxy-coated solid electrolyte tantalum capacitors. Materials. 12(8):1220.
4.
DuN, MaH, YangX, YangK, ZhaoQ.2022. Investigation on the heat transfer and product characteristics of waste PCB recycled by a novel pilot-scale pyrolysis furnance. Process Saf Environ Prot. 160:910–920.
5.
GaoR, XuZ.2019. Pyrolysis and utilization of nonmetal materials in waste printed circuit boards: debromination pyrolysis, temperature-controlled condensation, and synthesis of oil-based resin. J Hazard Mater. 364:1–10.
6.
GotićM, JurkinT, MusićS, UnfriedK, SydlikU, Bauer-ŠegvićA.2013. Microstructural characterizations of different Mn-oxide nanoparticles used as models in toxicity studies. J Mol Struct. 1044:248–254.
7.
GulyaevaRI, PetrovaSA, ChumarevVM, SelivanovEN.2020. High-temperature heat capacity and thermal expansion of the MnTa2O6. J Alloys Compd. 834:155153.
8.
HabashiF.1997. Handbook of extractive metallurgy, Vol. IV. Weinheim: Wiley-Vch.
9.
JadhaoPR, AhmadE, PantKK, NigamKDP.2020. Environmentally friendly approach for the recovery of metallic fraction from waste printed circuit boards using pyrolysis and ultrasonication. Waste Manage. 118:150–160.
10.
KinsmanLMM, CrevecoeurRAM, Singh-MorganA, NgwenyaBT, MorrisonCA, LoveJB.2020. Tantalum recycling by solvent extraction: chloride is better than fluoride. Metals (Basel). 10(3):1–9.
11.
KononovR, OstrovskiO, GangulyS.2007. Carbothermal solid state reduction of manganese ores. Innovations in the ferro alloy industry. In: Proceedings of the XI International Conference on Innovations in the Ferro Alloy Industry, Infacon XI, p. 258–267.
12.
KumarA, HoluszkoME, JankeT.2020. Determination of loss on ignition test conditions for nonmetal fraction from processed waste printed circuit boards. Resour Conserv Recycl. 163:105105.
13.
KumarY, ChopraS, GuptaA, KumarY, UkeSJ, MardikarSP.2020. Low temperature synthesis of MnO2 nanostructures for supercapacitor application. Mater Sci Energy Technol. 3:566–574.
14.
LiJ, DuanH, YuK, LiuL, WangS.2010. Characteristic of low-temperature pyrolysis of printed circuit boards subjected to various atmosphere. Resour Conserv Recycl. 54(11):810–815.
15.
LiK, XuZ.2019. A review of current progress of supercritical fluid technologies for e-waste treatment. J Cleaner Prod. 227:794–809.
16.
MackayDAR, SimandlGJ.2014. Geology, market and supply chain of niobium and tantalum—a review. Miner Deposita. 49(8):1025–1047.
17.
MancheriNA, SprecherB, DeetmanS, YoungSB, BleischwitzR, DongL, KleijnR, TukkerA.2018. Resilience in the tantalum supply chain. Resour Conserv Recycl. 129:56–69.
18.
MinetaK, OkabeTH.2005. Development of a recycling process for tantalum from capacitor scraps. J Phys Chem Solids. 66(2-4):318–321.
19.
MirS, DhawanN.2022. A comprehensive review on the recycling of discarded printed circuit boards for resource recovery. Resour Conserv Recycl. 178:106027.
20.
MoonJ, AwanoM, TakagiH, FujishiroY.1999. Synthesis of nanocrystalline manganese oxide powders: influence of hydrogen peroxide on particle characteristics. J Mater Res. 14(12):4594–4601.
21.
NaqviSR, TariqR, HameedZ, AliI, NaqviM, ChenWH, CeylanS, RashidH, AhmadJ, TaqviSA, ShahbazM.2019. Pyrolysis of high ash sewage sludge: kinetics and thermodynamic analysis using coats-redfern method. Renewable Energy. 131:854–860.
22.
NiuB, ChenZ, XuZ.2017a. An integrated and environmental-friendly technology for recovering valuable materials from waste tantalum capacitors. J Cleaner Prod. 166:512–518.
23.
NiuB, ChenZ, XuZ.2017b. Recovery of valuable materials from waste tantalum capacitors by vacuum pyrolysis combined with mechanical-physical separation. ACS Sustain Chem Eng. 5(3):2639–2647.
24.
NiuB, ChenZ, XuZ.2017 c. Recovery of tantalum from waste tantalum capacitors by supercritical water treatment. ACS Sustain Chem Eng. 5(5):4421–4428.
25.
PandaR, DinkarOS, KumariA, GuptaR, JhaMK, PathakDD.2021. Hydrometallurgical processing of waste integrated circuits (ICs) to recover Ag and generate mix concentrate of Au, Pd and Pt. J Ind Eng Chem. 93:315–321.
26.
PindarS, DhawanN.2021. Microwave processing of spent coin cells for recycling of metallic values. J Cleaner Prod. 280:124144.
27.
RamonH, PeetersJR, SterkensW, DuflouJR, KellensK, DewulfW.2020. Techno-economic potential of recycling tantalum containing capacitors by automated selective dismantling. Procedia CIRP. 90:421–425.
ShenY, ChenX, GeX, ChenM.2018. Chemical pyrolysis of e-waste plastics: char characterization. J Environ Manag. 214:94–103.
30.
ShikikaA, SethurajanM, MuvundjaF, MugumaoderhaMC, GaydardzhievS.2020. A review on extractive metallurgy of tantalum and niobium. Hydrometallurgy. 198:105496.
31.
SinhaMK, PurcellW.2019. Reducing agents in the leaching of manganese ores: a comprehensive review. Hydrometallurgy. 187:168–186.
32.
UeberschaarM, Dariusch JalalpoorD, KorfN, RotterVS.2017. Potentials and barriers for tantalum recovery from waste electric and electronic equipment. J Ind Ecol. 21(3):700–714.
33.
U.S. Geological Survery. 2022. Mineral commodity summaries 2022. Angew Chem, Int Ed. 6(11):951–952.
34.
XiaL, WeiX, WangH, YeF, LiuZ.2022. Valuable metal recovery from waste tantalum capacitors via cryogenic crushing-alkaline calcination-leaching process. J Mater Res Technol. 16:1637–1646.
35.
YangJ, FengJ, LiW, ChenX, LiuX, RuanJ, QiuR, XiongY, TianS.2019. A resource-utilization way of the waste printed circuit boards to prepare silicon carbide nanoparticles and their photocatalytic application. J Hazard Mater. 373:640–648.
