Fe-Mn spinels are common bonding phases in ferromanganese sinter and play an important role in determining sinter strength. This study analysed spinel phases from ferromanganese sinter to determine the range of compositions present and examine the relationship between phase composition and microhardness. Spinels with α-vredenburgite and jacobsite compositions had notably increased mean Al content compared to that of end-member Fe- or Mn-spinels. There was a strong negative correlation between the Fe+Al content and the Mn/Fe ratio of sinter jacobsite and of α-vredenburgite, indicating the likely substitution of Al3+ for Mn3+ in the vredenburgite structure. Mixed Fe-Mn spinels had higher Vickers and Knoop microhardness and fracture toughness than end-member Fe- or Mn-spinels. It is likely that the presence of Al in the octahedral site in the α-vredenburgite structure is related to the increased microhardness and, therefore, should have a positive effect on sinter strength if vredenburgite is present in sufficient quantities.
AnstisGR, ChantikulP, LawnBR, MarshallDB.1981. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements. J Am Ceram Soc. 64(9):533–538.
2.
BeardJS, TracyRJ.2002. Spinels and other oxides in Mn-rich rocks from the Hutter Mine, Pittsylvania County, Virginia, U.S.A.: implications for miscibility and solvus relations among jacobsite, galaxite, and magnetite. Am Mineral. 87:690–698.
3.
BhattacharyyaiS, Krishna RaoSVG, SarmaKJ, PrabhavatiR.1984. On jacobsites from Vizianagaram manganese belt of Eastern Ghats, Andhra Pradesh. Records of the Geological Survey of India. 114(2):15–18.
4.
BowieSH, TaylorK.1958. A system of ore mineral identification. Min Mag. 99:265–277; 337–345.
5.
BruggerJ, MeisserN.2006. Manganese-rich assemblages in the Barrhorn Unit, Turtmanntal, Central Alps, Switzerland. Can Mineral. 44(1):229–248.
6.
CribbleAJ, StanleyCJ.1993. Quantitative data file for ore minerals. Dordrecht: Springer-Science+Business Media, B. V.
7.
DasguptaHC, ManickavasagamR.1981. Chemistry and cell-volume of jacobsite solid-solutions from the metamorphosed manganiferous sediments of India. Neues Jahrb Mineralogie Abh. 142(3):309–319.
8.
DasguptaS, BhattacharyaPK, ChattopadhyayG, FukuokaM, BanerjeeH, RoyS.1987. Genetic reinterpretation of crystallographicintergrowths of jacobsite andhausmannite from natural assemblages. Mineral Petrol. 37:109–116.
9.
DeshpandeS P.1960. Ore-microscopic studies of the manganese ore-minerals of old M.P. II. Satak, Beldongri, Lohdongri and Kachurwahi. Nagpur District. Indian Academy of Sciences Section A. 51:202–218.
10.
EsseneEJ, PeacorDR.1983. Crystal chemistry and petrology of coexisting galaxite and jacobsite and other spinel solutions and solvi. Am Mineral. 68:449–455.
11.
FrenzelG.1980. The manganese ore minerals. In: VarentsovIM, GrassellyG, editors. Geology and geochemistry of manganese. Vol. 1 - general problems: mineralogy, geochemistry, methods. Stuttgart: E. Schweizerbart'sche Verlagsbuchhandlung; p. 25–158.
12.
GnosE, PetersT.1995. Tephroite-hausmannite-galaxite from a granulite-facies manganese rock of the United Arab Emirates. Contrib Mineral Petrol. 120:372–377.
13.
LiuB, ZhangY, SuZ, LuM, PengZ, LiG, JiangT.2017. Formation mechanism of MnxFe3−xO4 by solid-state reaction of MnO2 and Fe2O3 in air atmosphere: morphologies and properties evolution. Powder Technol. 313:201–209.
14.
LooCE, WanKT, HowesVR.1988. Mechanical properties of natural and synthetic mineral phases in sinters having varying reduction degradation indices. Ironmaking Steelmaking. 15(6):279–285.
15.
LuL, IshiyamaO.2015. Iron ore sintering. In: LuL, editor. Iron ore: mineralogy, processing and environmental sustainability. Cambridge: Woodhead Publishing; p. 395–434.
16.
LucchesiS, RussoU, Della GuistaA.1997. Crystal chemistry and cation distribution in some Mn-rich natural and synthetic spinels. Eur J Mineral. 9:31–42.
17.
MarshallDB, NomaT, EvansAG.1982. A simple method for determining elastic-modulus-to-hardness ratios using Knoop indentation measurements. J Am Ceram Soc. 65:C175–C176.
18.
MasonB.1943. Alpha-vredenburgite. Geologiska Föreningen i Stockholm Förhandlingar. 65(3):263–270.
19.
OsawaS, KikuchiT, HariyaY.1992. Phase equilibria in the system MnFe2O4-Mn3O4. Mineral J. 16(1):28–39.
20.
OstwaldJ.1991. Mineralogical reactions in manganese sintering. ICAM ‘91: International Conference on Applied Mineralogy, Pretoria, South Africa.
21.
PetersonMJ.2019. Quantifying the composite microhardness and fracture toughness of iron ore sinter and their relationship to sinter metallurgical indices. Iron Ore 2019. Perth, Western Australia, AusIMM: 395-413.
22.
PetersonMJ, HapugodaS.2020. Microhardness characterisation of manganese ore minerals – implications for downstream processing. Miner Eng. 157: 1–17.
23.
PetersonMJ, ManuelJR, HapugodaS.2017. Microhardness testing of Hematite-Goethite Fe ores – implications for their textural characterisation and geometallurgy. In: Iron Ore 2017. Perth: AusIMM; p. 319–330.
24.
RoyS.1959a. Variation in etch behaviour of jacobsite with different cell dimensions. Nature. 183:1256–1257.
25.
RoyS.1959b. Mineralogy and texture of the manganese ore bodies of Dongari Buzurg, Bhandara District, Bombay state, India, with a note on their genesis. Econ Geol. 54:1556–1574.
26.
SinhaM, NistalaSH, ChandraS, MankhandTR, GhoseAK.2017. Correlating mechanical properties of sinter phases with their chemistry and its effect on sinter quality. Ironmak Steelmak. 44(2):100–107.
27.
SivaprakashC.1980. Mineralogy of manganese deposits of Koduru and Garbham, Andhra Pradesh, India. Econ Geol. 75:1083–1104.
28.
SorensenB, GaalS, RingdalenE, TangstadM, KononovR, OstrovskiO.2010. Phase compositions of manganese ores and their change in the process of calcination. Int J Miner Process. 94(3-4):101–110.
29.
TaylorBN, KuyattCE.1994. Guidelines for evaluating and expressing the uncertainty of NIST measurement results. Natl. Inst. Stds. Tech. Technical Note 1297. Washington (DC): U.S. Govt. Print. Off., 20 pp.
30.
Van HookHJ, KeithML.1958. The system Fe3O4-Mn3O4. Am Mineral. 43:69–83.
31.
YoungB. B., MillmanA. P.1964. Microhardness and deformation characteristics of ore minerals. Transactions of the Institute for Mining and Metallurgy B: Applied Earth Science. 73:437–466.
32.
ZhangY, LiuB, YouZ, SuZ, LuoW, LiG, JiangT.2016. Consolidation behavior of high-Fe manganese ore sinters with natural basicity. Miner Process Extr Metall Rev. 37(5):333–341.
