The optimum conditions for manganese dioxide (MnO2) removal were investigated in two simulated conditions, purification and electrowinning, using a Pb-0.7 wt.% Ag electrode. Linear sweep voltammetry and Cyclic voltammetry tests were conducted to study the effect of temperature and concentrations. SEM-EDS and XRD were employed to study the surface characterisations and chemical compositions. The results revealed that the electrowinning operating conditions are more appropriate than the purification conditions for MnO2 removal. The highest current efficiency of manganese removal was 21% which was obtained in the EW electrolyte at 125 A m−2 at 40°C after 2 h of electrolysis. The Current Efficiency was increased significantly at lower Mn ion concentrations (0.1–1.0 g L−1) while it stayed constant beyond the concentration of 1.0 g L−1. The results showed that an increase in temperature depolarised the oxygen evolution reaction and the addition of Mn2+ suppressed formation of PbO2 on anode surface.
CachetC, Le Pape-RérolleC, WiartR.1999. Influence of Co2+ and Mn2+ ions on the kinetics of lead anodes for zinc electrowinning. J Appl Electrochemistry. 29(7):811–818. DOI:10.1023/A:1003513325689
2.
ChenX, ChenG, YuePL.2001. Stable Ti/IrOx-Sb2O5-SnO2 anode for O2 evolution with low Ir content. J Phys Chem B. 105(20):4623–4628. DOI:10.1021/jp010038d
3.
ClarkeCJ, BrowningGJ, DonneSW.2006. An RDE and RRDE study into the electrodeposition of manganese dioxide. Electrochim Acta. 51(26):5773–5784. DOI:10.1016/j.electacta.2006.03.013
4.
CzerwińskiA, ŻelazowskaM, GrdeńM, KucK, MilewskiJD, NowackiA, WójcikG, KopczykM.2000. Electrochemical behavior of lead in sulfuric acid solutions. J Power Sources. 85(1):49–55. DOI:10.1016/S0378-7753(99)00381-X
5.
De MussyJP, MacphersonJV, DelplanckeJL.2003. Characterisation and behaviour of Ti/TiO2/noble metal anodes. Electrochim Acta. 48(9):1131–1141. DOI:10.1016/S0013-4686(02)00824-1
6.
DubyP.1993. The history of progress in dimensionally stable anodes. JOM. 45(3):41–43. DOI:10.1007/BF03222350
7.
HrussanovaA, MirkovaL, DobrevT, VasilevS.2004. Influence of temperature and current density on oxygen overpotential and corrosion rate of Pb–Co3O4, Pb–Ca–Sn, and Pb–Sb anodes for copper electrowinning: part I. Hydrometallurgy. 72(3-4):205–213. DOI:10.1016/j.hydromet.2003.07.004
8.
KulandaisamyS, RethinarajJP, ChockalingamSC, VisvanathanS, VenkateswaranKV, RamachandranP, NandakumarV.1997. Performance of catalytically activated anodes in the electrowinning of metals. J Appl Electrochem. 27(5):579–583. DOI:10.1023/A:1018454830073
9.
LeeJY, KangDK, LeeK, ChangD.2011. An investigation on the electrochemical characteristics of Ta2O5-IrO2 anodes for the application of electrolysis process. Mater Sci Appl. 2(04):237. DOI:10.4236/msa.2011.24030
10.
LeeJA, MaskellWC, TyeFL.1977. The electrochemical reduction of manganese dioxide in acidic solutions: part I. Voltammetric peak 1. J Electroanal Chem Interfacial Electrochem. 79(1):79–104. DOI:10.1016/S0022-0728(77)8040
11.
LiK, ChenJ, ChenG, PengJ, RuanR, SrinivasakannanC.2019a. Microwave dielectric properties and thermochemical characteristics of the mixtures of walnut shell and manganese ore. Bioresour Technol. 286:121381. DOI:10.1016/j.biortech.2019.121381
12.
LiK, ChenG, LiX, PengJ, RuanR, OmranM, ChenJ.2019b. High-temperature dielectric properties and pyrolysis reduction characteristics of different biomass-pyrolusite mixtures in microwave field. Bioresour Technol. 294:122217. DOI:10.1016/j.biortech.2019.122217
13.
LiK, ChenG, ChenJ, PengJ, RuanR, SrinivasakannanC.2019 c. Microwave pyrolysis of walnut shell for reduction process of low-grade pyrolusite. Bioresour Technol. 291:121838. DOI:10.1016/j.biortech.2019.121838
14.
LiK, ChenJ, PengJ, RuanR, OmranM, ChenG.2020a. Dielectric properties and thermal behavior of electrolytic manganese anode mud in microwave field. J Hazard Mater. 384:121227. DOI:10.1016/j.jhazmat.2019.121227
15.
LiK, ChenJ, PengJ, OmranM, ChenG.2020b. Efficient improvement for dissociation behavior and thermal decomposition of manganese ore by microwave calcination. J Cleaner Prod. 260:121074. DOI:10.1016/j.jclepro.2020.121074
16.
LiK, JiangQ, GaoL, ChenJ, PengJ, KoppalaS, OmranA, ChenG.2020 c. Investigations on the microwave absorption properties and thermal behavior of vanadium slag: improvement in microwave oxidation roasting for recycling vanadium and chromium. J Hazard Mater. 395:122698. DOI:10.1016/j.jhazmat.2020.122698
17.
LiK, ChenJ, PengJ, RuanR, SrinivasakannanC, ChenG.2020 d. Pilot-scale study on enhanced carbothermal reduction of low-grade pyrolusite using microwave heating. Powder Technol. 360:846–854. DOI:10.1016/j.powtec.2019.11.015
MahonM, AlfantaziA.2014. Manganese consumption during zinc electrowinning using a dynamic process simulation. Hydrometallurgy. 150:184–191. DOI:10.1016/j.hydromet.2014.10.007
22.
MohammadiM, AlfantaziA.2015. The performance of Pb–MnO2 and Pb–Ag anodes in 2 Mn (II)-containing sulphuric acid electrolyte solutions. Hydrometallurgy. 153:134–144. DOI:10.1016/j.hydromet.2015.02.009
23.
MohammadiM, AlfantaziA.2016. Evaluation of manganese dioxide deposition on lead-based electrowinning anodes. Hydrometallurgy. 159:28–39. DOI:10.1016/j.hydromet.2015.10.023
24.
MorimitsuM, OtogawaR, MatsunagaM.2000. Effects of cathodizing on the morphology and composition of IrO2-Ta2O5/Ti anodes. Electrochim Acta. 46(2):401–406. DOI:10.1016/S0013-4686(00)00598-3
25.
MsindoZS, SibandaV, PotgieterJH.2010. Electrochemical and physical characterisation of lead-based anodes in comparison to Ti-(70%) IrO2/(30%) Ta2O5 dimensionally stable anodes for use in copper electrowinning. J Appl Electrochem. 40(3):691–699. DOI:10.1007/s10800-009-0044-7
26.
NijjerS, ThonstadJ, HaarbergGM.2000. Oxidation of manganese (II) and reduction of manganese dioxide in sulphuric acid. Electrochim Acta. 46(2-3):395–399. DOI:10.1016/S0013-4686(00)00597-1
27.
OtogawaR, MorimitsuM, MatsunagaM.1998. Effects of microstructure of IrO2-based anodes on electrocatalytic properties. Electrochim Acta. 44(8):1509–1513. DOI:10.1016/S0013-4686(98)00274-6
28.
RecéndizA, NavaJL, GonzálezI.2008. Electrochemical characterization of MnO2 anodically formed during the zinc electrowinning process. ECS Trans. 15(1):79–89.
29.
RodriguesS, ShuklaAK, MunichandraiahN.1998. A cyclic voltammetric study of the kinetics and mechanism of electrodeposition of manganese dioxide. J Appl Electrochem. 28(11):1235–1241. DOI:10.1023/A:1003472901760
30.
RuetschiP, AngstadtRT.1964. Anodic oxidation of lead at constant potential. J Electrochem Soc. 111(12):1323. DOI:10.1149/1.2425996
31.
SandovalS, ClaytonC, DominguezS, UngerC, RobinsonT.2010. Development and commercialization of an alternative anode for copper electrowinning. Proc Cu. 4:1635–1648.
32.
SchmachtelS, PustSE, ToiminenM, WittstockG, KontturiK, ForsénO, BarkerMH.2008. Local process investigations on composite electrodes: on the way to understanding design criteria for spray coated anodes in Zn electrowinning. J South Afr Inst Min Metall. 108(5):273–283.
33.
SchmachtelS, ToiminenM, KontturiK, ForsénO, BarkerMH.2009. New oxygen evolution anodes for metal electrowinning: MnO2 composite electrodes. J Appl Electrochem. 39(10):1835–1848. DOI:10.1007/s10800-009-9887-1
34.
SharpeTF.1975. Low-rate cathodic linear sweep voltammetry (LSV) studies on anodized lead. J Electrochem Soc. 122(7):845–851. DOI:10.1149/1.2134359
35.
TilakBV, RamamurthyAC, ConwayBE.1986. High performance electrode materials for the hydrogen evolution reaction from alkaline media. Proc Indian Academy of Sciences-Chem sci. 97(3):359–393.
36.
UedaM, WatanabeA, KameyamaT, MatsumotoY, SekimotoM, ShimamuneT.1995. Performance characteristics of a new type of lead dioxide-coated titanium anode. J Appl Electrochem. 25(9):817–822. DOI:10.1007/BF00772199
37.
VerbaanB, MullinderB.1981. The simultaneous electrowinning of manganese dioxide and zinc from purified neutral zinc sulphate at high current efficiencies. Hydrometallurgy. 7(4):339–352. DOI:10.1016/0304-386X(81)90031-1
38.
VisscherW.1976. Cyclic voltammetry on lead electrodes in sulphuric acid solution. J Power Sources. 1(3):257–266. DOI:10.1016/0378-7753(76)81003-8
39.
YamamotoY, FuminoK, UedaT, NambuM.1992. A potentiodynamic study of the lead electrode in sulphuric acid solution. Electrochim Acta. 37(2):199–203. DOI:10.1016/0013-4686(92)85003-4
40.
XuLK, ScantleburyJD.2003. Microstructure and electrochemical properties of IrO2 /Ta2O5-coated titanium anodes. J Electrochem Soc. 150(6):B254–B261. DOI:10.1149/1.1569479
41.
ZhangW, ChengCY.2007. Manganese metallurgy review. part III: manganese control in zinc and copper electrolytes. Hydrometallurgy. 89(3):178–188. DOI:10.1016/j.hydromet.2007.08.011
42.
ZhangW.2010. Performance of lead anodes used for zinc electrowinning and their effects on energy consumption and cathode impurities. http://hdl.handle.net/20.500.11794/22078
43.
ZhangQB, HuaY.2009. Effect of Mn2+ ions on the electrodeposition of zinc from acidic sulphate solutions. Hydrometallurgy. 99(3-4):249–254. DOI:10.1016/j.hydromet.2009.09.002.
44.
ZhangC, DuanN, JiangL, XuF.2018. The impact mechanism of Mn2+ ions on oxygen evolution reaction in zinc sulfate electrolyte. J Electroanal Chem. 811:53–61. DOI:10.1016/j.jelechem.2018.01.040
