The goal of this study was the fixation of water-soluble polyethylene glycol (PEG) into the wooden cell wall. The dimensional stability of beech wood (Fagus sylvatica) modified with PEG400 and various carboxylic acids (1,2,3,4-butanetetracarboxylic acid (BTCA), citric acid (CA), malic acid, pyromellitic acid, tartaric acid, L-glutamic acid hydrochloride, ethylene diamine tetraacetic acid disodium salt dihydrate, trans-aconitic acid, maleic acid and itaconic acid) was examined. Investigations of anti-swelling efficiency (ASE), weight-percent gain (WPG) and bulking effect were made. Both the highest dimensional stabilization (values of ASE at the end of examination between 37 and 40%) and the best fixation of the chemicals in the wood (total loss of WPG between 37 and 38%) were achieved with combinations of BTCA/PEG and CA/PEG. The variants impregnated without PEG had lower bulking values. Successful modification of wood seems to be possible with BTCA, CA and malic acid in combination with PEG400.
AldrichS.2020. Safety data sheet L-Glutamic acid hydrochloride.
4.
AlexanderA, EmanuelM, BalalAN.2006. The solubilities of benzene polycarboxylic acids in water. J Chem Thermodyn. 38(5):565–571. doi:10.1016/j.jct.2005.07.007.
5.
BjurhagerI, LjungdahlJ, WallströmL, GamstedtEK, BerglundLA.2010. Towards improved understanding of PEG-impregnated waterlogged archaeological wood: a model study on recent oak. Holzforschung. 64(2):243–250. doi:10.1515/hf.2010.024.
6.
BurchardW.1985. Polysaccharide. eigenschaften und nutzung. institut für makromolekulare chemie der universität Freiburg. Berlin: Springer-Verlag.
7.
ChoiH-M.1992. Nonformaldehyde polymerization-crosslinking treatment of cotton fabrics for improved strength retention. Text Res J. 62(10):614–618. doi:10.1177/004051759206201010.
8.
DasD, BakshiS, BhattacharyaP.2016. Dyeing of EDTA-modified cotton with reactive dyes. Cloth Text Res J. 34(3):196–206. doi:10.1177/0887302X16652998.
9.
DawsonBSW, FranichRA, KroeseHW, StewardD.1999. Reactivity of radiata pine sapwood towards carboxylic acid anhydrides. Holzforschung. 53(2):195–198. doi:10.1515/HF.1999.032.
10.
de CuadroP, BeltT, KontturiKS, RezaM, KontturiE, VuorinenT, HughesM.2015. Cross-linking of cellulose and poly(ethylene glycol) with citric acid. React Funct Polym. 90:21–24. doi:10.1016/j.reactfunctpolym.2015.03.007.
11.
DespotR, HasanM, JugM, ŠefcB.2008. Biological durability of wood modified by citric acid. Drv Ind. 59(2):55–59.
12.
DingelsC, SchömerM, FreyH.2011. Die vielen Gesichter des Poly(ethylenglykol)s. Chem unserer Zeit. 45(5):338–349. doi:10.1002/ciuz.201100551.
13.
DongY, GaoS, WangK, ZhanX, LiZ, ZhaoY, WuM, HughesM.2023. The effect mechanism and properties of poplar wood cross-linking modified with polyols and polycarboxylic acid. Wood Material Science & Engineering.
14.
DongY, LiuX, LiuJ, YanY, WangK, LiJ.2021. Evaluation of anti-mold, termite resistance and physical-mechanical properties of bamboo cross-linking modified by polycarboxylic acids. Constr Build Mater. 272:121953.
15.
EssouaGG, BlanchetP, LandryV, BeauregardR.2015. Maleic anhydride treated wood: effects of drying time and esterification temperature on properties. Bioresources. 10(4):6830–6860. doi:10.15376/biores.10.4.6830-6860.
16.
EssouaGG, BlanchetP, LandryV, BeauregardR.2016. Pine wood treated with a citric acid and glycerol mixture: biomaterial performance improved by a bio-byproduct. Bioresources. 11(2):3049–3072. doi:10.15376/biores.11.2.3049-3072.
17.
FengX, XiaoZ, SulS, WangQ, XieY.2014. Esterification of wood with citric acid. The catalystic effects of sodium hypophosphite (SHP). Holzforschung. 68(4):427–433.
18.
FischerE, SpeierA.1895. Darstellung der Ester. Ber Dtsch Chem Ges. 28(3):3252–3258. doi:10.1002/cber.189502803176.
19.
FreemanMH, ShupeTF, VloskyRP, BarnesHM.2003. Past, present, and future of the wood preservation industry. For Prod J. 53(10):8–15.
20.
FuchsW.1928. Zur kenntnis des genuinen lignins, I.: Die acetylierung des fichtenholzes. Ber Dtsch Chem Ges (A and B Ser). 61(5):948–951. doi:10.1002/cber.19280610512.
21.
GESTIS Stoffdatenbank (Hg.). 2016. Safety data sheet glutamic acid.
22.
GrattanDW.2014. Waterlogged wood. In: PearsonC, editor. Conservation of marine archaeological objects. Burlington: Elsevier Science; p. 55–67.
23.
HasanM, DespotR, ŠefcB, IštokI, SedlarT, LacićR.2012. Optimisation of Modification of Beech Wood by Citric Acid; In: Jones D, Militz H, Petrič M, Pohleven F, Humar M, Pavlič M, editors. The Sixth European Conference on Wood Modification. Proceedings. Ljubljana, Slovenia.
24.
HillCAS.2006. Wood modification: chemical, thermal and other processes. In: Wiley series in renewable resources. Chichester, NJ: John Wiley & Sons; p. 1–239.
25.
HoffmannP.1986. On the stabilization of waterlogged Oakwood with PEG. II. Designing a two-step treatment for multi-quality timbers. Stud Conserv. 31:103–113.
26.
HoffmannP.2013. Conservation of archaeological ships and boats. Personal experiences. London: Archetype.
27.
JeremicD, CooperP, BrodersenP.2007. Penetration of poly(ethylene glycol) into wood cell walls of red pine. Holzforschung. 61:272–278. doi:10.1515/HF.2007.068.
28.
KiljunenS, KoskiA, KunttuM, ValkonenT.2018. Impregnation of chemicals into wood. Veröffentlichungsnr. EP2485880B1.
29.
KimB-H, JangJ, KoS-W.2000. Durable press finish of cotton fabric using malic acid as a crosslinker. Fibers Polym. 1(2):116–121. doi:10.1007/BF02875195.
30.
KimI, KarlssonO, JonesD, MantanisG, SandbergD.2021. Dimensional stabilisation of Scots pine (Pinus sylvestris L.) sapwood by reaction with maleic anhydride and sodium hypophosphite. Eur J Wood Wood Prod. 79(3):589–596. doi:10.1007/s00107-020-01650-6.
31.
KollmannF, CôtéWA.1968. Principles of wood science and technology. Berlin: Allen Unwin; Springer.
32.
KurkowiakK, EmmerichL, MilitzH.2021. Wood chemical modification based on bio-based polycarboxylic acid and polyols – status quo and future perspectives. Wood Mat Sci Eng. 17(6):1–15. doi:10.1080/17480272.2021.1925961.
33.
LarnøyE, KaracaA, GobakkenLR, HillCAS.2018. Polyesterification of wood using sorbitol and citric acid under aqueous conditions. Int Wood Prod J. 9(2):66–73. doi:10.1080/20426445.2018.1475918.
34.
LeeSH, Md TahirP, LumWC, TanLP, BawonP, ParkB-D, Osman Al EdrusSSA, AbdullahUH, 2020. A review on citric acid as green modifying agent and binder for wood. Polymers (Basel). 12(8):1–21. doi:10.3390/polym12081692.
35.
L'HostisC, ThévenonM-F, FredonE, GérardinP.2018. Improvement of beech wood properties byin situ formation of polyesters of citric and tartaric acid in combination with glycerol. Holzforschung. 72(4):291–299. doi:10.1515/hf-2017-0081.
36.
LundK, BrelidH.2014. 1,2,3,4-Butanetetracarboxylic acid cross-linked softwood kraft pulp fibers for use in fluff pulp applications. J Eng Fibers Fabr. 9(3). doi:10.1177/155892501400900317.
37.
MeintsT, HansmannC, Gindl-AltmutterW.2018. Suitability of different variants of polyethylene glycol impregnation for the dimensional stabilization of oak wood. Polymers (Basel). 10(1):81. doi:10.3390/polym10010081.
38.
MilitzH, MaiC.2018a. 4.2 holzschutz. 4.2.8 chemischer holzschutz. In: WagenführA, ScholzF, editors. Taschenbuch der Holztechnik. 3., aktualisierte Auflage. München: Fachbuchverlag Leipzig im Carl Hanser Verlag; p. 476–485.
39.
MilitzH, MaiC.2018b. 4.3 sonstige vergütungsverfahren. 4.3.1 wirkungsprinzipien der holzmodifizierung. In: WagenführA, ScholzF, editors. Taschenbuch der holztechnik. unter mitarbeit von R. emmler. 3 Aufl. München: Fachbuchverlag Leipzig im Carl Hanser Verlag; p. 485–489.
40.
MorénR.1981. Die polyäthylenglykol-imprägnierung von holz und ihre auswirkungen bei holztrocknung und holzbearbeitung. Holz als Roh- und Werkstoff. 39(12):142–152. doi:10.1007/BF02619122.
41.
MortensenMN.2009. Stabilization of polyethylene glycol in archaeological wood. Dissertation, Technical University of Denmark.
42.
MubarokM, MilitzH, DumarçayS, GérardinP.2020. Beech wood modification based on in situ esterification with sorbitol and citric acid. Wood Sci Technol. 54(3):479–502. doi:10.1007/s00226-020-01172-7.
43.
OrganRM.1959. Carbowax and other materials in the treatment of waterlogged paleolithic wood. Stud Conserv. 4:96–105.
44.
PereiraFV, GurgelLVA, GilLF.2010. Removal of Zn2 + from aqueous single metal solutions and electroplating wastewater with wood sawdust and sugarcane bagasse modified with EDTA dianhydride (EDTAD) (176).
45.
PeyerSM, WolcottMP, FenoglioDJ.2000. Reducing moisture swell of densified wood with polycarboxylic acid resin. Wood Fiber Sci. 32:520–526.
46.
PuttmannS, BurianB, MüllerL, MüllerM.2023. Impact of different polyethylene glycol wood treatments on the adhesive properties of beech wood. Int Wood Prod J. 14(1):34–41.
47.
PuttmannS, MüllerL, BurianB, MüllerM.2018. Influence of various polyethylene glycol treatments on the dimensional stability of beech wood. Proceedings of the 9th European conference on wood modification 2018. Arnhem, The Netherlands.
48.
RosenqvistAM.1959. The stabilizing of wood found in the Viking ship of Oseberg—Part II. Stud Conserv. 4:62–72.
49.
RousselC, MarchettiV, LemorA, WozniakE, LoubinouxB, GérardinP.2001. Chemical modification of wood by polyglycerol/maleic anhydride treatment. Holzforschung. 55(1):57–62. doi:10.1515/HF.2001.009.
50.
RowellRM.2014. Acetylation of wood – a review. Int J Lignocellul Prod. 1(1):1–27. doi:10.22069/ijlp.2014.1920.
51.
SandbergD, KutnarA, KarlssonO, JonesD.2021. Wood modification technologies: principles, sustainability, and the need for innovation. 1 Aufl. Weinheim: CRC Press.
52.
SantosoM, WidyoriniR, PrayitnoTA, SulistyoJ.2017. Bonding performance of maltodextrin and citric acid for particleboard made from nipa fronds. J Korean Wood Sci Technol. 4(45):432–443.
53.
ŠauperlO, Stana-KleinschekK, RibitschV.2009. Cotton cellulose 1, 2, 3, 4 buthanetetracarboxylic acid (BTCA) crosslinking monitored by some physical—chemical methods. Text Res J. 79(9):780–791. doi:10.1177/0040517508096222.
54.
SchefferTC, MorrellJJ.1998. Natural durability of wood: a worldwide checklist of species. Oregon State University. Forest Research Laboratory.
55.
SchmidR. D.2016. Taschenatlas der Biotechnologie und Gentechnik. 3. Auflage. Weinheim: VCH, Acta Humaniora.
56.
SchneiderA.1969. Beiträge zur dimensionsstabilisierung des holzes mit polyäthylenglykol - erste mitteilung: grundlegende untersuchungen zur dimensionsstabilisierung des holzes mit polyäthylenglykol. Holz als Roh- und Werkstoff. 6:27.
57.
SchneiderA.1970. Beiträge zur Dimensionsstabilisierung des Holzes mit Polyäthylenglykol- Zweite Mitteilung: Untersuchungen über Eigenschaftsänderungen des Holzes durch Tränkung mit Polyäthylenglykol und über die Wirksamkeit verschiedener Tränkverfahren. Holz als Roh- und Werkstoff. 28(1):20–34. doi:10.1007/BF02615722.
58.
SchrammC, RindererB.1999. HPLC analysis of polycarboxylic acids used as durable press finishing agents/ organic catalysts for cellulosic material. Fresenius J Anal Chem. 364(8):714–719. doi:10.1007/s002160051420.
59.
SchrammC, RindererB, BobleterO.1997. Kinetic data for the crosslinking reaction of polycarboxylic acids with cellulose. J Soc Dyers Colour. 113(12):346–349. doi:10.1111/j.1478-4408.1997.tb01861.x.
60.
SennaAM, NovackKM, BotaroVR.2014. Synthesis and characterization of hydrogels from cellulose acetate by esterification crosslinking with EDTA dianhydride. Carbohydr Polym. 114:260–268. doi:10.1016/j.carbpol.2014.08.017.
61.
SheehanJC, HessGP.1955. A New method of forming peptide bonds. J Am Chem Soc. 77(4):1067–1068. doi:10.1021/ja01609a099.
62.
ShenL, XuH, KongL, YangY.2015. Non-Toxic crosslinking of starch using polycarboxylic acids: kinetic study and quantitative correlation of mechanical properties and crosslinking degrees. J Polym Environ. 23(4):588–594. doi:10.1007/s10924-015-0738-3.
63.
Sipahi SaglamE.2003. Synthese und charakterisierung spezieller cellulose-pfropfcopolymerer. Dissertation. Technische Universität Darmstadt. Darmstadt. Fachbereich Chemie.
64.
StammAJ.1956. Dimensional stabilization of wood with carbowaxes 1. For Prod J. 6:201–204.
65.
StammAJ.1959, Oct 1. Effect of polyethylene glycol on the dimensional stability of wood. For Prod J. IX:375–381.
66.
TeacaˇC-A, TanasaˇF.2020. Wood surface modification - classic and modern approaches in wood chemical treatment by esterification reactions. Coatings. 10(7):629.
67.
UrakiY, HashidaK, WatanabeN, SanoY, SasayaT, FujimotoH.1994. Novel wood processing by maleic acid - glycerol mixture system: improvement of water resistance and mechanical property of cellulose by the processing. J Wood Chem Technol. 14(3):429–449. doi:10.1080/02773819408003106.
68.
VidukaA.2002. Survey of methods used by some large institutions specialising in the conservation of wet organic archaeological materials. The Winston Churchill Memorial Australia.
69.
VollhardtKPC, SchoreNE, PeterK.2005. Organische Chemie, 4. Aufl. Wiley-VCH; p. 1–1542.
70.
VukusicSB, KatovicD, GrgacSF, TrajkovicJ, VoncinaB.2010. Study of the wood modification process with polycarboxylic acids and microwave tratment. Wood Res. 55(3):121–130.
71.
VukusicSB, KatovicD, SchrammC, TrajkovicJ, SefcB.2006. Polycarboxylic acids as non-formaldehyde anti-swelling agents for wood. Holzforschung. 60(4):439–444. doi:10.1515/HF.2006.069.
72.
WallströmL, LindbergKAH.1999. Measurement of cell wall penetration in wood of water-based chemicals using SEM/EDS and STEM/EDS technique. Wood Sci Technol. 33(2):111–122. doi:10.1007/s002260050103.
73.
WangH, ZhangC, ChuX, ZhuP.2020. Mechanism of Antiwrinkle finishing of cotton fabrics using mixed polycarboxylic acids. Int J Polym Sci. 1–10. doi:10.1155/2020/3876595.
74.
WangY.2009. Polymeric composition for cellulosic material binding and modifications. Veröffentlichungsnr: WO. 2009/006356 A1.
75.
WelchCM.1988. Tetracarboxylic acids as formaldehyde-free durable press finishing agents. Text Res J. 58(8):480–486. doi:10.1177/004051758805800809.
WelchCM, PetersJG.2000. Additives for improved whiteness and DP performance with citric acid finishing. Text Chem Color Am Dyest Report. 32(10):37–41.
79.
Weyerhaeuser Company. 2001. High bulk cellulosic fibers crosslinked with malic acid and process for making the same.
80.
WidstenP, DooleyN, ParrR, CaprichoJ, SucklingI.2014. Citric acid crosslinking of paper products for improved high-humidity performance. Carbohydr Polym. 101:998–1004. doi:10.1016/j.carbpol.2013.10.002.
81.
WuH, WangP, WangZ, SunY, LiC, DongY.2021. Preparation of EDTA modified cotton fiber iron complex and catalytic properties for aqueous Cr(VI) reduction and dye degradation. Water Pract Technol. 16(3):1000–1011. doi:10.2166/wpt.2021.047.
82.
XieY, FuQ, WangQ, XiaoZ, MilitzH.2013. Effects of chemical modification on the mechanical properties of wood. Eur J Wood Wood Prod. 71(4):401–416. doi:10.1007/s00107-013-0693-4.
83.
YangCQ.1993. Infrared spectroscopy studies of the effects of the catalyst on the ester cross-linking of cellulose by poly(carboxylic acids). J Appl Polym Sci. 50(12):2047–2053. doi:10.1002/app.1993.070501202.
84.
YangCQ, GuX.2001. Polymerization of maleic acid and itaconic acid studied by FT-Raman spectroscopy. J Appl Polym Sci. 81(1):223–228. doi:10.1002/app.1432.
85.
YangCQ, LuY.1999. In-situ Polymerization of Maleic Acid and Itaconic Acid and Crosslinking of Cotton Fabric. Text Res J. 69(10):782–789. doi:10.1177/00405175990601013.
86.
YangCQ, WangX, KangI-S.1997. Ester Crosslinking of Cotton Fabric by Polymeric Carboxylic Acids and Citric Acid. Text Res J. 67(5):334–342. doi:10.1177/004051759706700505.
87.
YaoW, WangB, YeT, YangY.2013. Durable Press Finishing of Cotton Fabrics with Citric Acid: Enhancement of Whiteness and Wrinkle Recovery by Polyol Extenders. Ind. Eng. Chem. Res. 52(46):16118–16127. doi:10.1021/ie402747x.
88.
YeT, WangB, LiuJ, ChenJ, YangY.2015. Quantitive analysis of citric acid/sodium hypophosphite modified cotton by HPLC and conductometric titration. Carbohydr Polym. 121:92–98. doi:10.1016/j.carbpol.2014.12.028.
89.
ZoldnersJ, KiselevaT.2013. Modification of hemicelluloses with polycarboxylic acids. Holzforschung. 5(67):567–571.
