The pine needles bio-oil was partially replaced with phenol-formaldehyde (PF) resin at a rate of up to 40% by weight. The wood adhesive characteristics of a newly produced bio-oil phenol-formaldehyde (BOPF) resin with 10% bio-oil replacements was found to be comparable to those of pure PF resin with similar shear strength. DSC revealed that the curing temperature of 20 wt-% BOPF resin decreased from 95 to 60°C. Thermal degradation of BOPF resins was somewhat lower than that of pure PF resin, according to TGA and DTG data, and was similar in 10 and 20 wt-% BOPF resins. The presence of methylene bridges between phenols shown by FTIR analysis indicated that the wood adhesive had a good quality. According to SEM examination, the 10 and 20% BOPF resins showed a flat microstructure comparable to the pure PF resin.
AslanM, ÖzbayG, AyrilmisN.2015. Adhesive characteristics and bonding performance of phenol formaldehyde modified with phenol-rich fraction of crude bio-oil. J Adhes Sci Technol. 29:2679–2691.
2.
AyrilmisN, ÖzbayG.2018. Technological properties of plywood bonded with phenol-formaldehyde resol resin modified with bio-oil. Cerne. 23:493–500.
3.
AyrilmisN, ÖzbayG, KöktenES.2020. Properties of wood-based composites bonded with phenol-formaldehyde resin synthesized with bio-oil of lignocellulosic wastes. Mat Int. 2:0131–0138. doi:10.33263/Materials22.131138.
4.
BaiJ, WuY, LiuX, ZhongK, HuangY, GoaH.2015. Antibacterial activity of shikimic acid from pine needles of Cedrusdeodara against Staphylococcus aureus through damage to cell membrane. Int J Mol Sci. 16:27145–27155.
5.
BridgwaterAV.2003. Renewable fuels and chemicals by thermal processing of biomass. Chem Eng J. 91:87–102.
6.
BridgwaterAV.2007. The production of biofuels and renewable chemicals by fast pyrolysis of biomass. Int J Global Energy Issues. 27:160–203.
7.
ChanakyaHN, ReddyBVV, ModakJ.2009. Biomethanation of herbaceous biomass residues using 3-zone plug flow like digesters—a case study from India. Renew Energy. 34:416–420.
8.
ChaouchM, DioufPN, LaghdirA, YinS.2014. Bio-oil from whole-tree feedstock in resol-type phenolic resins. J Appl Polym Sci. 131: 1–6.
9.
ChengSN, YuanZS, AndersonM, LeitchM, XuCB.2012. Synthesis of biobased phenolic resins/adhesives with methylolated wood-derived bio-oil. J Appl Polym Sci. 126:431–441.
10.
ChoiG, OhS, LeeS, KimJ.2015. Production of bio-based phenolic resin and activated carbon from bio-oil and biochar derived from fast pyrolysis of palm kernel shells. Bioresour Technol. 178:99–107.
11.
CuiY, HouX, WangW, ChangJ.2017. Synthesis and characterization of bio-oil phenol formaldehyde resin used to fabricate phenolic based materials. Materials (Basel). 10:668.
12.
CzernikS, BridgwaterAV.2004. Overview of applications of biomass fast pyrolysis oil. Energy Fuels. 18:590–598.
13.
DongF, WangM, WangZ.2014. Bio-oil as substitute of phenol for synthesis of resol-type phenolic resin as wood adhesive. Int J Chem Reactor Eng. 16:1–7.
14.
KimJS, ChungHY.2011. Profiling of volatile components using gas chromatography-mass spectrometry in commercial pine needle (Pinus densiflora S. and Z.) powder. Prev Nutr Food Sci. 16:45–54.
15.
KimKH, JeongHS, KimJY, HanGS, ChoiIG, ChoiJW.2012. Evaluation of the antifungal effects of bio-oil prepared with lignocellulosic biomass using fast pyrolysis technology. Chemosphere. 89:688–693.
16.
LinR, SunJ, YueC, WangX, TuD, GaoZ.2014. Study on preparation and properties of phenol-formaldehyde-Chinese fir liquefaction copolymer resin. Maderas Cienc Tecnol. 16(2):159–174.
17.
MandalS, BhattacharyaTK, VermaAK, HaydaryJ.2017. Optimization of process parameters for bio-oil synthesis from pine needles (Pinus roxburghii) using response surface methodology. Chem Pap. 72:603–616.
18.
MaoA, XuW, XiE, LiQ, WanH.2018. Evaluation of phenol-formaldehyde resins modified and blended with pyrolysis bio-oil for plywood. For Prod J. 68(2):113–119.
19.
MohanD, PittmanCU, SteelePH.2006. Pyrolysis of wood/biomass for bio-oil: a critical review. Energy Fuels. 20:848–889.
20.
ÖrsY, AtarM, KeskinH.2004. Bonding strength of some adhesives in wood materials impregnated with Imersol-Aqua. Int J Adhes Adhes. 24:287–294.
21.
ÖzbayG, CekicC, AhmadMS, KoktenES.2020. Synthesis of bio-oil phenol-formaldehyde resins under alkali conditions: physical, chemical and thermal properties of resins and bonding performance. Drvna Industrija. 71(1):19–27.
22.
RenX, CaiH, DuH, ChangJ.2017. The preparation and characterization of pyrolysis bio-oil-resorcinol-aldehyde resin cold-set adhesives for wood construction. Polymers (Basel). 9:232.
23.
RenXY, MengJJ, MooreMA, ChangJM, GouJS, ParkSK.2014. Thermogravimetric investigation on the degradation properties and combustion performance of bio-oils. Bioresour Technol. 152:267–274.
24.
SzakonyiG, ZelkóR.2012. Water content determination of super disintegrants by means of ATR-FTIR spectroscopy. J Pharm Biomed Anal. 63:106–111.
25.
VarmaAK, MondalP.2015. Physicochemical characterization and kinetics study of pine needles for pyrolysis process. J Therm Anal Calorim. 124:487–497.
