This paper characterizes Erythrina fusca Lour. in terms of anatomical, morphological and chemical properties to evaluate its efficacy as a pulping raw material. It is characterized with 47.0% α-cellulose and 28.8% lignin content with a fibre length of 1.11 mm. The vessels (pores) are distinct and form porous semi-rings, with a row of larger pores at the beginning of the growth layer, which facilitate penetration of chemicals during the cooking phase of pulping. Kraft pulping of E. fusca was carried out by varying cooking temperature, time and alkali charge. At optimum condition of 14% active alkali for 2 h of cooking at 170°C, pulp yield was 40% with kappa number of 26.6. The papermaking properties were also evaluated and showed tensile index of 52.4 N m g−1 with tear index of6.8 mN m2 g−1 at oSR of 57. This species can be used as a raw material for writing and printing grade pulp.
AlvesES, Angyalossy-AlfonsoV.2002. Ecological trends in the wood anatomy of some Brazilian species. 2. Axial parenchyma, rays and fibres. IAWA J. 23(4):391–418.
2.
AmidonTE.1981. Effect of the wood properties of hardwoods on kraft paper properties. Tappi J. 64:123–126.
Anon. 2021b. Personnel communication with the Bangladesh Forest Department.
5.
ColleyJ.1973. The influence of vessel elements on the picking tendency of eucalypt pulps. Paper Tech. 14:293–296.
6.
CossalterC, Pye-SmithC.2003. Fast-wood forestry myths and realities. Jakarta: CIFOR, Indonesia; p. 50.
7.
DoE (Department of Environment). 2019. Sixth national report to the convention on biological diversity. Dhaka: Department of Environment, Min. Environ. & Forest, Govt. of Bangladesh; p. 1–133.
8.
FerdousT, NiY, QuaiyyumMA, UddinMN, JahanMS.2021. Non-wood fibers: relationships of fiber properties with pulp properties. ACS Omega. 6(33):21613–21622.
9.
FerreiraAL, SeveroETD, CalonegoFW.2011. Determination of fiber length and juvenile and mature wood zones from Hevea brasiliensis trees grown in Brazil. Eur J Wood Wood Prod. 69(4):659–662.
10.
GallayW.1962. The formation and structure of paper. In: BolamF., editor. Technical section of British paper and board makers’ association, London; p. 491–535.
11.
GaoW, XiangZ, ChenK, YangR, YangF.2015. Effect of depth beating on the fiber properties and enzymatic saccharification efficiency of softwood kraft pulp. Carbohydr Polym. 127:400–406.
12.
HaqueM, NanjibaM, JahanMS, QuaiyyumMA, AlamMZ, NayeemJ.2019. Pre-bleaching of kraft acacia pulp. Nord Pulp Pap Res J. 34(2):165–172.
13.
HaqueMM, AzizMI, HossainMS, QuaiyyumMA, AlamMZ, JahanMS.2019b. Pulping of hybrid Acacia planted in a social forestry program in Bangladesh. Cellul Chem Technol. 53(7–8):739–745.
14.
HaqueMM, UddinMN, QuaiyyumMA, NayeemJ, AlamMZ, JahanMS.2019a. Pulpwood quality of the second generation Acacia auriculiformis. J Bioresources Bioprod. 4(2):73–79.
15.
HaygreenJG, BowyerJL.1996. Forest products and wood science: an introduction, 3rd ed.. Ames: Iowa University Press.
16.
InnokP, RukachaisirikulT, PhongpaichitS, SuksamrarnA.2010. Fuscacarpans A–C, new pterocarpans from the stems of Erythrina fusca. Fitoterapia. 81(6):518–523.
17.
InnokP, RukachaisirikulT, SuksamrarnA.2009. Flavanoids and pterocarpans from the bark of Erythrina fusca. Chem Pharm Bull. 57(9):993–996.
18.
JahanMS, ChowdhuryN, NiY.2010. Effect of different locations on the morphological, chemical, pulping and papermaking properties of Trema orientalis (Nalita). Bioresour Technol. 101(6):1892–1898.
19.
JahanMS, HaiderMM, RahmanMM, MondalGK, BiswasD.2011. Evaluation of rubber wood (Hevea brasiliensis) as a pulping and papermaking raw materials. Nordic Pulp Paper Res J. 26(3):258–262.
20.
JahanMS, HaqueMM, QuaiyyumMA, NayeemJ, BasharMS.2019. Radial variation of anatomical, morphological and chemical characteristics of Acacia auriculiformis in evaluating pulping raw material. J Indian Acad Wood Sci. 16(2):118–124.
21.
JahanMS, MunSP.2003. Characterization of Nalita wood (Trema orientalis) as a source of fiber for papermaking (Part I): anatomical, morphological and chemical properties. Korea Tappi J. 35(5):72–79.
22.
JahanMS, MunSP.2004. Effect of tree age on the soda-Anthraquinone pulping of Nalita Wood (Trema orientalisis). J Ind Eng Chem. 10(5):766–771.
23.
JoutsimoO, WathénR, TamminenT.2005. Effects of fiber deformations on pulp sheet properties and fiber strength. Pap Puu. 87(6):392.
24.
KangTAPH, PaulapuroH.2006. Effect of external fibrillation on paper strength. Pulp Pap Can. 107(7–8):51–54.
25.
KhaomekP, IchinoC, IshiyamaA, SekiguchiH, NamatameM, RuangrungsiN, SaifahE., 2008. In vitro antimalarial activity of prenylated flavonoids from Erythrina fusca. J Nat Med. 62(2):217–220.
26.
LaftahWA, Wan Abdul RahmanWA.2016. Pulping process and the potential of using non-wood pineapple leaves fiber for pulp and paper production: a review. J Nat Fibres. 13(1):85–102.
27.
LeblancHA, McGrawRL, NygrenP.2007. Dinitrogen-fixation by three neotropical agroforestry tree species under semi-controlled field conditions. Plant Soil. 291:199–209. https://doi.org/10.1007/s11104-006-9186-0.
28.
MunSP, JahanMS, Al-MarufA, ChowdhuryDN.2011. Chemical characterization of six mangrove species in Bangladesh. Wood Sci Technol. 45(2):281–288.
29.
OnaT, SonodaT, ItoK, ShibataM, TamaiY, KojimaY, YoshizawaN.2001. Investigation of relationships between cell and pulp properties in Eucalyptus by examination of within-tree property variations. Wood Sci Technol. 35(3):229–243.
30.
PageDH.1985b. The mechanism of strength development of dried pulps by beating. Svensk Papperstidn. 88(3):R30–R35.
31.
PageDH, SethRS, JordanBD, BarbeMC.1985a. Curl, crimps, kinks and microcompressions in pulp fibres – their origin, measurement and significance. Papermaking raw Materials: Their Interaction with the Production Process and their effect on Paper Properties-transactions of the Eighth Fundamental Research Symposium; Oxford, U.K.: Transactions of the 8th Fundamental Research Symposium. p. 183–227.
32.
PattR, KordsachiaO, FehrJ.2006. European hardwoods versus Eucalyptus globulus as a raw material for pulping. Wood Sci Technol. 40(1):39–48.
33.
SahriMH, IbrahimFH, ShukorNAA.1993. Anatomy of Acacia mangium grown in Malaysia. IAWA J. 14(3):245–251.
34.
SarkarAM, JahanMS, NayeemJ, ArafatKMY, RahmanMM, PopyRS, JamalAHMSIM, QuaiyyumMA.2021. Chemical and morphological characterization and pulping of Casuarina equisetifolia. Nord Pulp Pap Res J. https://doi.org/10.1515/npprj-2021-0032.
35.
SethRS.1990. Fibre quality factors in papermaking – II the importance of fibre coarseness. MRS online Proceedings Library (OPL). p. 197.
36.
SharmaA, DhimanG, LalPS, GodiyalRD, ThapliyalBP.2021. Characterisation of moringa oleifera (drumstick) wood for pulp and paper making. Cellul Chem Technol. 55(3-4):255–262.
37.
TimellTE.1967. Recent progress in the chemistry of wood hemicelluloses. Wood Sci Technol. 1(1):45–70.
38.
WangaardFF, WilliamsDL.1970. Fiber length and fiber strength in relation to tearing resistance of hardwood pulps. Tappi. 53(11):2153–2154.
39.
WimmerR, DownesGM, EvansR, RasmussenG, FrenchJ.2002. Direct effects of wood characteristics on pulp and handsheet properties of Eucalyptus globulus. Holzforschung. 56(3):244–252.
